Toyota 86 Mud Guards on 2017 BRZ
 

After pestering a vendor (just a little) for info on whether the mud guards for the new 86 fit the BRZ, they offered to send me a set and cover return postage if they didn't work. Installed yesterday and they fit just fine. You'll want to cut a hole in the fender well plastic to use the "extra" attachment point on the rear guard, it's way too floppy without it-photo below. I didn't see a need to do that up front since the piece attaches solidly to the sheet metal.

http://i64.tinypic.com/1rdnqa.jpg

http://i67.tinypic.com/i6zevr.jpg

http://i65.tinypic.com/2cduxcz.jpg

I used all the pan head screws in the kit so the flaps won't vibrate and rub the paint off.

I just want to pass the info on to people, I purchased the 2017 OEM mud guards for the toyota 86 from the FT86speedfactory and the rears do not fit flush with the bumper for the 2017 subaru BRZ. The 2013-2016 mud guards do fit...

Makes sense, the BRZ uses the old bumper and the fenders didn't change.

Yeah, I guess there is a bit of a gap just above where the flap is contoured to go under the fender, my bad. Seems to be flush elsewhere.