Need clutch alignment tool in inland empire/la area please help!!
 

In desperate need of a clutch alignment tool throw out bearing decide to explode on me on the drive to California from Arizona! Ripped everything apart got the new throw out and replaced the clutch to be safe but don't have the alignment tool for final install trying to roadkill this have to be back in Az tonight for work tomorrow hopefully someone can help! Sorry if I posted this in the wrong place. Currently in riverside https://uploads.tapatalk-cdn.com/201...7e5b7d8f48.jpghttps://uploads.tapatalk-cdn.com/201...5cc6eaabba.jpg


Sent from my iPhone using Tapatalk

Did you loosen the pressure plate? I had to redrop my trans to check the TOB clip and i didnt have an issue for reinstall.

He's fuqd. Eyeballed the clutch installation.

OP, aren't there any auto parts stores close by? Any one should be able to look up the correct tool for you?

Back in the day, we used a socket and a wood dowel and electrical tape. Then slightly snug the bolts and feel around the edges to see if it's on uniform.

However, like @Ultramaroon suggests, go to the store and buy one for less that $10.


humfrz