Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Best Header option to pair with OFT? (https://www.ft86club.com/forums/showthread.php?t=117200)

timmydatooth 04-04-2017 01:31 PM

Best Header option to pair with OFT?
 
So I recently pulled the trigger on buying an OFT. Since I'm spending all this money on it I feel like I might as well take advantage of it and use it to its full potential by doing the stage 2 tune. I was just wondering what are the best headers to get for our cars? I prefer UEL over EL just because I want the "rumble" but I will consider EL if they are better. I was leaning towards the OFH3 headers just because it is made for the OFT and they also have a custom tune made for them. But I also hear a lot of good things about tomei and the gruppe-s headers. Honestly I just want something that will give me the most gains paired with the OFT, best overall quality, and will not give me a CEL once installed. side question, does doing the stage 2 tune get rid of the CEL that installing some new headers gives you?

Also I should state I have a 2013 Scion FRS Automatic Trans. with Invidia Q300 catback, Invidia Catless front pipe, afe dry drop in filter, and mishimoto silicone tube.


:thanks: Let me know what you guys think.

Johnders2586 04-04-2017 03:24 PM

I have the OFH (version 2) and OFT and felt it was really good quality and fit perfect no issues, it came with gaskets and hardware which is nice.. It definitely gives you the rumble. Depending on the rest of your exhaust system, some will be more noticeable (loud) than others obviously. The stage 2 tune does eliminate the CEL. I had a Tomei header on my STi and that was also very good quality. Given the brands you listed I think its fair to say they will all give you the same general quality in the price range. I personally went OFH because I felt it would pair with the OFH tune the best seeing as they are the same manufacturer. You can read up on a million other post related to the topic but at the end of the day go with what you feel comfortable with, they all do the job.

timmydatooth 04-04-2017 03:49 PM

Quote:

Originally Posted by Johnders2586 (Post 2885272)
I have the OFH (version 2) and OFT and felt it was really good quality and fit perfect no issues, it came with gaskets and hardware which is nice.. It definitely gives you the rumble. Depending on the rest of your exhaust system, some will be more noticeable (loud) than others obviously. The stage 2 tune does eliminate the CEL. I had a Tomei header on my STi and that was also very good quality. Given the brands you listed I think its fair to say they will all give you the same general quality in the price range. I personally went OFH because I felt it would pair with the OFH tune the best seeing as they are the same manufacturer. You can read up on a million other post related to the topic but at the end of the day go with what you feel comfortable with, they all do the job.

I have the Q300 so it shouldn't be too loud once I get the headers in right?
also since you have the OFH, do you use the custom stage 2 tune made specifically for the OFH or do you just use the OTS stage 2 tune that came with the OFT?

smg1138 04-04-2017 03:49 PM

My JDL UEL header has been amazing. Excellent build quality and zero problems.

timmydatooth 04-04-2017 03:53 PM

Quote:

Originally Posted by smg1138 (Post 2885289)
My JDL UEL header has been amazing. Excellent build quality and zero problems.

did you do a tune? no CEL after install?

Johnders2586 04-04-2017 03:53 PM

With the Q 300 the sound will be relatively quiet from what I have read. That is one of the quietest on the market aside from stock. I used the "canned" tune that came on the OFT. To me its not worth the $ for a pro tune on a NA car for just exhaust modifications..

timmydatooth 04-04-2017 04:04 PM

Quote:

Originally Posted by Johnders2586 (Post 2885297)
With the Q 300 the sound will be relatively quiet from what I have read. That is one of the quietest on the market aside from stock. I used the "canned" tune that came on the OFT. To me its not worth the $ for a pro tune on a NA car for just exhaust modifications..

what is the "canned" tune? I think you misunderstood me. Theres a stage 2 tune that came with the OFT and then theres a special stage 2 tune made for the OFH that you can down load from there website

http://www.openflashtablet.com/downloads/

pinetree 04-04-2017 04:34 PM

I have Stage 2 tune with JDL catted UEL headers, everything works great, no issues.

Just make sure you get the right tune regarding fuel, but for easiest and no hassles might as well go with their headers, they tuned it to work perfect together.

smg1138 04-04-2017 04:35 PM

Quote:

Originally Posted by timmydatooth (Post 2885296)
did you do a tune? no CEL after install?

Yes, I use the OFT Stage 2 tunes. No CEL's using those.

frs_caskey 04-04-2017 06:58 PM

Quote:

Originally Posted by pinetree (Post 2885332)
I have Stage 2 tune with JDL catted UEL headers, everything works great, no issues.

Just make sure you get the right tune regarding fuel, but for easiest and no hassles might as well go with their headers, they tuned it to work perfect together.

what catback do you have with the jdl catted header? been looking at getting this and using it with my mxp comp rs catback. did you get a good rumble with it even though its catted. also ive read that you dont want to do stage 2 with catted header. All good for you though? is your stage 2 custom?

pinetree 04-04-2017 07:44 PM

Quote:

Originally Posted by frs_caskey (Post 2885429)
what catback do you have with the jdl catted header? been looking at getting this and using it with my mxp comp rs catback. did you get a good rumble with it even though its catted. also ive read that you dont want to do stage 2 with catted header. All good for you though? is your stage 2 custom?

Speedfactory V1 exhaust, good rumble, everyone seems to like the sound. Does get fairly loud on cold startup, and can be loud during high RPM's, but that comes with the territory whenever you swap headers. Otherwise sound is very reasonable for what it is.

They say that because otherwise they would be on the hook if anyone blows up their engine while using their tunes. Gives them protection, kinda smart for any company when you think about it.

Anyhow, been running the stock stage 2 tune with these parts (not custom), and everything works great. No engine issues that I'm aware of. if there is anything about running "lean/rich" on it I don't know, for that you'd need a custom tune. Have 70k miles on my car now, when I replaced my spark plugs they looked good.

Hope this helps

Tor 04-04-2017 08:17 PM

Gruppe S header works great with the stg 2 tune or even the dedicated OFH tune.

[YOYO] 04-04-2017 08:35 PM

Tomei UEL here. Runs awesome with the OFT tunes and sounds the part too :thumbsup:

timmydatooth 04-04-2017 10:55 PM

Would you guys say getting Tomei or jdl would be better than getting the OFH? Anyone know how the OFH are quality and build wise?


All times are GMT -4. The time now is 05:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.