FS: RallyBacker front lip, Chargespeed sides and rears, Morimoto fogs w bezels
 

FOR SALE

Contact info: text at 4257720141, or DM me here or on Instagram at microsteve40

Item: Rallybacker FRS Type II front lip with Uras connecting rods. Authentic JDM
Price: $500 obo + shipping
Color: D4S black upper lip portion, splitter portion is just plain black
Fitment: Myself and Brian from BK Industries spent about 20 hours prepping and fitting this lip, and achieved an OEM urethane level of fitment
Included: lip with built in splitter, splitter rods, screws for the ends of the lip
What you need: 3M double sided tape (not included)
Condition: the upper, lip portion is near perfect. The lower, splitter portion has a few scrapes and rock chips. I usually just fill these in with a Sharpie, but the reason I had the splitter portion painted a plain black (all professionally painted) is that you can tape off the top and spray paint or plasti-dip easily so that it always looks new.

Pics:
http://i.imgur.com/9klAC5T.jpg
http://i.imgur.com/GrLXfQB.jpg
http://i.imgur.com/eNV7Y8n.jpg
http://i.imgur.com/5rr5XPv.jpg
http://i.imgur.com/VAyzOL9.jpg
http://i.imgur.com/DaVzQDc.jpg
http://i.imgur.com/AA25AMW.jpg

Item: authentic Chargespeed carbon fiber sides and rear spats
Price: $500 obo + shipping
Color: carbon fiber with clear coat
Fitment: near perfect
Included: carbon fiber side skirts and rear spats, and mounting hardware for the side skirts
What you need: mounting hardware for the rear spats
Condition: sides are in good but not great condition. Have some scrapes and a couple cracks, all on the bottom sides. The biggest crack is noticeable, but not one person has ever asked me about it. Rears are perfect. They do have a couple extra mounting holes drilled in them, which you can use or not, but will not be noticeable when installed

Pics:
http://i.imgur.com/hAp2aGX.jpg?1
http://i.imgur.com/gmHX2rV.jpg
http://i.imgur.com/JbtEF9r.jpg
http://i.imgur.com/Q2MdroR.jpg
http://i.imgur.com/GvNgit4.jpg
http://i.imgur.com/udT82By.jpg

Item: Morimoto LED fog lights with OEM FRS bezels
Price: $150
Fitment: OEM fitment
Included: 2 LED fog lights with hardware and 2 OEM FRS bezels (made by Subaru)
What you need: just wire up the foglights
Condition: The fog lights are perfect, no scratches on the lenses. One of the tabs is broken on one of the bezels, but it was this way on my car and wasn't noticeable.

Pics:
http://i.imgur.com/OLZjANy.jpg?1
http://i.imgur.com/duxEJAD.jpg?1
http://i.imgur.com/fgQ4oHk.jpg?1

Pics of the car with parts installed (rear spats not shown):
http://i.imgur.com/PursTq0.jpg
http://i.imgur.com/TNRrycI.jpg
http://i.imgur.com/KV686FM.jpg
http://i.imgur.com/wtZGgUy.jpg
http://i.imgur.com/zY6LDli.jpg

Thanks for looking.

Fog lights sold. Bezel still available if anyone is interested.

interested in the rear spats.

PM'd

Bump. Make me some offers.

Still have? If so do you think the chargespeed sides would go underneath and bolt up to five axis side skirts

Sent from my Pixel using Tapatalk

How much for the bezelS?

If you still have the rear spats I'm interested. Can provide USA address.If your keen to ship.

Interested in toyota badge

Yes I still have them. I haven't seen the Five Axis sides but the CS sides are contoured to stock body so I'm sure you could make it would, but probably wouldn't bolt on perfectly.

PM'd

PM'd you.

Free bump.

Rear spats still for sale.

How much for the rear spats? Interested.