FS: 2013 FA20 engine w/spun bearing
 

50 miles on the coils and plugs, low-end knock. Had a shop do the plugs and an oil change, ended up putting a junkyard motor in it. Please allow a week or so for me to get it shipped, since it's back home in the shop. Asking $1,000 + shipping. Was running (roughly) still when pulled so I have no reason to believe the heads are damaged in any way, includes everything FA20 related in the pictures.

http://i.imgur.com/GlLWwTp.jpg

http://i.imgur.com/JLRDr7L.jpg

http://i.imgur.com/XmxP59x.jpg

Please follow the Member Classified Rules (#2) or I'll delete the thread.

Thanks,

ichi

Will get my mom to do it when she gets home from work. Sorry about that.

How much to ship to 50501?

I'll check tomorrow. I can ship after Easter easiest, will that work for you?

That works. Can you give me some more information about the engine?

Work got insane, sorry for the delay. I've put in a request for a freight quote with my warehouse manager. Motor has only had bolt-ons and tune, had a code for a bad coil. Took it in, on the way home I got a CEL that I can't recall, but it was blinking and the motor seemed out of sync. Reset, started it, seemed 100%. Drove it home, then the next morning I started it and it knocked for maybe a second, then evened out. Was going to drive it to the shop that did the coil, and it started knocking hard on the way in w/low oil pressure light. Killed it immediately and took it to the shop that put in the coil. They took no responsibility. Buddy from back home was off for a few days, so he came and grabbed it and took it to my shop back home and we put a junkyard motor in it. The oil filter had brass shavings in it, but we did NOT want to tear into the engine to see anything else. Seems more complicated than we were wanting to deal with.

YRC FREIGHT- 4 DAYS, 264.76
R&L CARRIERS-2 DAYS, 274.82
SAIA- 2 DAYS, 286.70

I'm interested. Send me a PM so we can work out the details.