BRZ With Varis Arising 2 Front Bumper Q's
 

Is anyone here running the Varis front bumper on their BRZ? I have the entire kit ordered but I am concerned about how to fill the holes in the bumper where the fog lights and turn signals are supposed to go. I'll be installing the kit on a 2017 BRZ.

You have a few options.

1. Buy the 13-16 FR-S/GT86 turn signals or side markers and/or fog lights. Have them wired up. There are plenty of add-on kits to add fog lights to these cars.
2. Have the shop installing the kit fiberglass the holes closed prior to paint and bodywork.
3. Similar to the above step. Have the shop close up the turn signal holes only. Use the fog light openings with an aftermarket brake duct kits designed for the same purpose.
4. Leave the holes open and just install a fine black mesh to finish off the front.

Cool thanks. I didn't even know you could wire the 13-16 turn signals into the 17s

Or see if original runduce sell the piece to cover the fogs and turn signals holes