Works Bell Short Boss Hub 540S without quick release
 

Did anyone run a WB short boss hub without a quick release? Were you able to stuff all the airbag wires, resistors, etc nicely?

Depending on the steering wheel, you will need a adapter inbetween the hub and the steering wheel because of the bolt pattern.
I have seen other Twins that bought the kit and it came with 2 resistors. When I got mine, I made the extra resistor which I found on the forum. Everything fits nicely afterward!

I am running short boss on mine with no quick release. Make sure the resistors are connected firmly. If they get loose you will throw on the abs and traction lights. You have plenty of space to tuck the harness.

i run this with a quick release