Feeler FS. Full 2013 STi Brembo take offs.
 

Hey Guys! Feeling out selling my entire braking system. I want to upgrade to a full 6pot/4pot BBK w/ floating rotors for track abuse this next season.

Offering these up for $2100.

This is a full 2013 STi takeoff set. Originally black with STi logos*, these have been fully disassembled, inspected, sandblasted, and plugs swapped out for bleeders so they can be fully bled and have correct piston orientation. They were then "Brembo gold" color matched** to the 2004-2007 color code, OptiCoat ceramic coated, and reassembled. Ive been using Motul RBF600 fluid in them this last year and they have seen 3 track days and around 20k miles of trouble free service. Seals and dust boots are in great shape.

Whats included:
Front and rear Brembo calipers. (direct bolt ons, no brackets needed)
All hardware (slider pins, spring clips, diagonal shims, cotter pins, bleeders, dust boots - All OE Brembo hardware)
Front rotors DBA T3 clubspec 4000 http://tinyurl.com/zh56fnj
Front street pads Hawk HPS 5.0 http://tinyurl.com/zm376lq
Front track pads Carbotech XP10 http://tinyurl.com/gnem8um
Rear rotors DBA T2 Street series http://tinyurl.com/jepnfsb
Rear street pads Hawk HPS 5.0 http://tinyurl.com/hof4vnl
Rear track pads Carbotech XP10 http://tinyurl.com/hle7ra7

Rotors are in excellent shape. They have the typical surface rust. No axial runout(no warping). No heavy scoring. Minor heat checking. You will NOT need to resurface these. These are STi rotors with dual drilled hubs (5x100) and the emergency parking brake works as it should.

Street pads have about 80% pad left, no cracking or taper wear.

Track pads have about 75% pad left. Minor cracking (typical) and no taper wear. Plenty of track days left in these.

I'm keeping my SS brake lines so you are on your own for those, but stock 86 lines work just fine.

Offering these local first to avoid shipping them.

They are currently on my car which is sitting at the shop waiting on a built FA20. So if they sell, Ill need a few days to pull them and clean them up.

No lowballs please, If no one wants them, I will post them in the WRX groups.

I will NOT separate. Its an entire package. Trades may be considered. Feel free to ask.

$500 deposit will hold them. It is OK to discuss a payment plan with me.

*see photo of how they originally were.
**see photo of two calipers, upper left caliper is factory color, lower right caliper is color matched. They are SPOT on.

http://i.imgur.com/pFGLmzW.jpg
http://i.imgur.com/PiJ5AuK.jpg
http://i.imgur.com/Cw7vsnB.jpg
http://i.imgur.com/XBh3sqV.jpg
http://i.imgur.com/sTeQmYF.jpg
http://i.imgur.com/zUw6RsV.jpg
http://i.imgur.com/gMDqsEB.jpg

Awhhh, gonna get yelled at for not having rule #2 in your pic.

Yeah I know.... paragraph two of my ad.

I should have a shot up with name and info tomorrow at the latest.

Thanks for the look!

If that's the case, I'll wait til tomorrow morning...

Man....those would of looked so good if you left them black!!

lol it's hard not to see them when they are all over the facebook group ;D :bellyroll:

Updated my man.

Haha, you KNOW you want these. Ill even offer to install for free. :thumbup:

Come to mn to install and deal lol. And paint them black again... Oh so tempting

Sold! That was fast! Lock it up @ichitaka05

:happyanim:

Yes sir