Any limiteds currently have their front bumper off?
 

I purchased a limited BRZ with front end damage and am in the process of repairing it. If anyone has their front bumper off I'd like to get some pictures of the wiring. Theres 3 (black, red, brown) wires on the driver side near the windshield washer tank. I am guessing it goes into a 4 pin connector but am unsure where the 4 pin connector connects to. On the FRS this 4 pin is used front turn signals but BRZ has it built into the 8pin on headlight.

Thanks!

Keep in mind that these cars are wired for all the versions. That means there are a bunch of connectors and wires that don't get used on each version. You may have one of those unused connectors. That sounds like it could be the fog light connector?

Thats what I'm thinking as well but when I turned on the fogs the wires didnt power up so I'm kinda lost. I now have 3 extra from the right side as well. White with red, brown and black. I tried reading the wiring manual and its a complete mess. The fog light wires listed don't match up to any wires on my harness. :iono: Oh well. If they dont fit I'll just terminate and move on.

Mine is off at the moment. What exactly do you need to see?

On the left hand side do you see a connector with 3 wires. Brown black and red? Should be near headlight/washer area. The same connector on the right side with white/red, brown and black. What do they connect to?

They are fogs after all! Third wire is for fog beam angle. Just missing the connector pinout now.