Innovated Dynamics Carbon Fiber Trunk Install
 

https://youtu.be/76IyObEXTFI?t=1m32s

Information & link to buy the trunk here:
http://www.innovateddynamics.com/category/frs-gt86-brz

1. Remove trunk liners just some push pins.
2. Remove 8 bolts holding the trunk garnish, remove 4 bolts holding down the trunk lock down.
3. Disconnect and remove light bulb in the trunk garnish.
4. Unclip / remove all the lines off the OEM trunk, best bet is using a flat head and needle nose pliers.
5. Snake that line down to the drive side of the trunk.
6. Remove the clips holding down the struts connecting to the trunk.
7. Remove the 4 bracket holding down the trunk.
8. Remove trunk and reverse steps.

How long was your total install time? Awaiting mine to come in!

Did you transfer the outside trunk lock tumbler to the new trunk?