That would be great, were you able to weigh it like that?

I'll take one into work when I get a chance

Can someone confirm whether or not the Eibach bolt on spacers will work with the factory Performance Pkg wheels?

My concern is that the bolt on ones require the wheels have pockets on the backside to clear the factory studs when the spacer is bolted down.

http://www.ft86speedfactory.com/eiba...l#.W428oxopChC

Took my wheel off, found a 20mm H&R spacer with 5x100 pattern and did some measurements with dial calipers. Appears I have about 0.050”-0.085” clearance between the poke of the studs through the spacer and the recessed area of the wheel pockets.

Poke: ~0.175”
Pocket: 0.225” to 0.260”

Still couldn’t hurt to have someone with actual use confirm. :)

Thanks!

Just for reference:

slightly used 2018 PP BRZ wheel and tire combo weight on my industrial scale: 39.5 lbs

new WedsSport TC105N 17x9 +35 and 255/40/17 RE71R combo: 15.5 + 24 = 39.5 lbs
with weights and brake dust should be about 40 lbs

Did you ever get a chance to weigh it?