Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Scion FR-S / Toyota 86 GT86 General Forum (https://www.ft86club.com/forums/forumdisplay.php?f=2)
-   -   HELP!! BRZ FRONT BUMPER ON FRS (https://www.ft86club.com/forums/showthread.php?t=112141)

swaavor 10-29-2016 11:43 PM

HELP!! BRZ FRONT BUMPER ON FRS
 
I have a 2013 Frs and switched front bumpers out for the brz bumper. The blinkers aren't recognized by the turn signal and its in hyper flash. Im trying to figure out how i can fix this, ill post pictures later. Thanks

humfrz 10-30-2016 12:14 AM

Quote:

Originally Posted by swaavor (Post 2785983)
I have a 2013 Frs and switched front bumpers out for the brz bumper. The blinkers aren't recognized by the turn signal and its in hyper flash. Im trying to figure out how i can fix this, ill post pictures later. Thanks

Hello swaavor and welcome to our forum ....... :clap:

You switched an FR-S front bumper for a BRZ front bumper ...... now that is a switch ....... :confused0068:

Maybe your FR-S is "rejecting" the foreign part ..... ??

Seriously, I have summoned our local expert @Ultramaroon , on electrical things, for your assistance.

Meanwhile, I suggest you check all the appropriate fuses.

Next, check all wires that should be grounded.

Maybe you have a bad bulb .. ??


humfrz

gramicci101 10-30-2016 12:28 AM

Are the blinkers in your brz bumper LED? If your frs bumper was halogen and your brz bumper is led, you need a blinker module to account for the drastically different resistance between the two.

Ultramaroon 10-30-2016 12:41 AM

Yup.

PetrolioBenzina 10-30-2016 07:32 PM

OT but good place to put it. I have read that FR-S parts will fit an 86. An FR-S front bumper would fit the 17 86, correct? A BRZ bumper would as well then, correct?

swaavor 10-30-2016 09:39 PM

Quote:

Originally Posted by PetrolioBenzina (Post 2786296)
OT but good place to put it. I have read that FR-S parts will fit an 86. An FR-S front bumper would fit the 17 86, correct? A BRZ bumper would as well then, correct?

Yes, They bot have the same clips and bolts. But yeah they were halogen and now led.

swaavor 10-30-2016 09:41 PM

Now im having a problem with my Engine its tapping when at idle but when i go above 3000 RPMs it goes away. Im super lost on this no codes are popping up either.

Ultramaroon 10-30-2016 09:59 PM

Quote:

Originally Posted by swaavor (Post 2786352)
Now im having a problem with my Engine its tapping when at idle but when i go above 3000 RPMs it goes away. Im super lost on this no codes are popping up either.

Does it sound like this?

swaavor 10-30-2016 10:37 PM

Quote:

Originally Posted by Ultramaroon (Post 2786360)
Does it sound like this?

Yup just like that, i was on the highway today going to work never went over 80 mph and got off. While at the stop light i noticed in neutral the rpms dropped and i turned my radio down, then noticed the sound. So i hit the throttle to bring the rpms up and it got louder until about 3k rpms. A few hours go by, I go on break to see if its still making the noise and nothing i drove it around and in first at around 6k it started to knock again then i brought it to a stop and parked it. I went back in to work and after my shift was over i started it and at first it knocked then stopped. Im Sooo Lost

Leonardo 10-30-2016 10:58 PM

The interweb suggests a 6ohm 50watt resistor. Look up
"Blinker resistor"

Ultramaroon 10-30-2016 11:06 PM

Quote:

Originally Posted by swaavor (Post 2786371)
Yup just like that, i was on the highway today going to work never went over 80 mph and got off. While at the stop light i noticed in neutral the rpms dropped and i turned my radio down, then noticed the sound. So i hit the throttle to bring the rpms up and it got louder until about 3k rpms. A few hours go by, I go on break to see if its still making the noise and nothing i drove it around and in first at around 6k it started to knock again then i brought it to a stop and parked it. I went back in to work and after my shift was over i started it and at first it knocked then stopped. Im Sooo Lost

Read @N1rve's post and his thread. He has personal experience. It's a rocker arm, I think.

swaavor 10-31-2016 01:19 AM

Quote:

Originally Posted by Ultramaroon (Post 2786383)
Read @N1rve's post and his thread. He has personal experience. It's a rocker arm, I think.

Thank you so much:thanks:

Ultramaroon 10-31-2016 01:24 AM

Quote:

Originally Posted by swaavor (Post 2786420)
Thank you so much:thanks:

Best wishes on the fix. Welcome to the forum and keep us posted.

swaavor 10-31-2016 02:11 AM

Quote:

Originally Posted by Ultramaroon (Post 2786423)
Best wishes on the fix. Welcome to the forum and keep us posted.

Thanks im gonna need it. Im calling the dealership tomorrow and scheduling an appointment..


All times are GMT -4. The time now is 06:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.