R2RO's Longterm 2JZ Build the "JZ86"
 

Hey everyone! I decided to create this journal to log my build of my 86JZ that will hopefully be swapped in 2017, Below I will list the parts I used to build this car both off the shelf and custom. As of right now I plan on keeping the FA20 inside of it since I have another build that I'm focusing my attention on, that build being my 86S with a fully built FA20 that I hope to hit 6-700whp.

Here's a couple of shitty photos before I upload good ones:

Car Specs:

2013 Scion FR-S Ultramarine

2JZ Engine Specs
-Pure Automotive 2JZGTE Swap kit (Planned)
-Xcessive Manufacturing Motor Mount Kit with Urethane Mounts (Planned)
-JDL Auto Design Exhaust Manifold (Planned)
-Garrett GTX3584R (Planned)
-PHR Modified 2JZ Timing Gear (Planned)
-PHR Modified Oil Pump (Planned)
-PHR Timing Belt Tensioner Bracket (Planned)
-PHR Billet (Aluminum Idler, Water Pump, and Alternator) Pulley Kit (Planned)
-Titan Motorsports 2JZ Intake & Exhaust Cam Gears (Planned)
-Induction Performance IGN1A Coil Kit (Planned)

Modifications:

FA20 Engine(Temporary):
-Berk Technology Track Pipe
-Braille Lightweight Battery (Soon to be installed)
-P-Tuning Battery tray (Soon to be purchased)
-Full Blown Motorsports Radiator with Fan Shroud(Soon to be installed)

Interior:
-Bride VIOS III Red Bucket Driver Seat with Bride FG Rail
-AEM Oil Pressure Gauge (Soon to be installed)

Drivetrain:
-ACT SB8-HDSS Clutch Kit
-Custom Reinforced Clutch Fork

Exterior:
-Monogram LED Headlights

Suspension:
-KW Variant 3 Coilovers with Velox Top Hats
-Velox Rear Lower Control Arms

Wheels and Tires:
-Advan GT 18x9.5 +40 with Toyo Tires 255/35R18

http://i1286.photobucket.com/albums/...pscpozikv7.jpg

My other "Past and Current" Cars:


My 2013 10 Series the "86S" (Current)
http://i1286.photobucket.com/albums/...psmo30jlqa.jpg

My 1989 Nissan 240sx Silvia conversion with an SR20DET (Sold)
http://i1286.photobucket.com/albums/...psdfz1rjsc.jpg

Sub'd. Can't wait to see this both the 86Sand JZ86 done. Good luck! :thumbsup:

I've been following @Pure Automotive budget 2JZ swap thread as well.

Sweet

Spicy

Saucy

Recently installed my KWV3's with Velox top hats & camber arms onto the car while I had some time to kill recently. Plus I finally went about doing my Monogram headlight conversion on this car, I still need to work out the DRL issue but they work and thats all that matters. Here she is guys. Oh and I installed my old Bride VIOS III from my previous build onto this car as well.