Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Exterior Parts (Aero, Lighting, Etc.) (https://www.ft86club.com/forums/forumdisplay.php?f=64)
-   -   Splitter, Diffuser (https://www.ft86club.com/forums/showthread.php?t=111466)

nelsonzep 10-09-2016 04:26 AM
Splitter, Diffuser
 
1 Attachment(s)
I have a fiberglass front splitter I made, can also have them done in aluminum

I do not doubt this will pass the "stand test".
Fiberglass is equivalent to aluminum in weight and strength.

Much easier to repair than aluminum and CF for all you riding low.

Also have a rear diffuser made of aluminum available. can make out of any material

Will also accept requests of any composite splitters you want out of CF, Kevlar, Fiberglass or any combination of them. Also offer repairs for composites.

diffuser is $200 + shipping

Splitter is $150 + shipping

ichitaka05 10-10-2016 12:33 PM
Please follow the Member Classified Rules (#2) or I'll delete the thread.

Quote:
2. You must post AT LEAST ONE picture of the item(s) for sale with a sign included in the photo. On the sign, should be your username, date and the words FT86Club.com on it. It can be handwritten or printed on a piece of paper. No photoshopped signs will be accepted.
Thanks,

ichi

Soloside 10-10-2016 12:42 PM
I'll bite. Pming you a few things

Brapologist 01-20-2017 11:11 PM
I'd be interested in a splitter and diffuser if the price is right. I also have a bunch of raw carbon fiber at home if we could work a deal to use that?

nater86 01-21-2017 08:09 AM
I would also be interested in a front splitter and rear diffuser if the price was right. Carbon fiber would be cool although I should probably look at fiber glass because of my ride height.

brianbeezy 01-25-2017 12:16 PM
I would be interested in a splitter and diffuser as well.

Packofcrows 01-26-2017 12:53 AM
$$$?

nelsonzep 03-23-2017 10:03 PM
Splitters would be around $140 and diffusers $200. sorry havnt been on in a while.

guybo 03-24-2017 06:54 PM
Will the diffuser extend far enough forward to make a flat bottom?

Kai Uhl 03-24-2017 11:06 PM
Quote:
Originally Posted by nelsonzep (Post 2770956)
I have a fiberglass front splitter I made.

I do not doubt this will pass the "stand test".
Fiberglass is equivalent to aluminum in weight and strength. (Will get exact weight soon)

Much easier to repair than aluminum and CF for all you riding low.
I will offer to repair any damage my fiberglass splitters will take for $20 no matter how big or small. If you break it in half I will still do it for $20.

Will soon have a rear diffuser, and passenger fender for those of yall who don't want to destroy your stock one. Will soon have both front fenders available after I get a hold of a driver side one. Hit me up if your interested.


Will also accept requests of any composite splitters you want out of CF, Kevlar, Fiberglass or any combination of them. Also offer repairs for composites.

Here is a link to a folder with photos of previous work.

https://drive.google.com/drive/folde...mM?usp=sharing
PM'd you

Keenercarguy 03-29-2017 01:28 PM
Do you have any airflow analysis' of the diffusers?? I'm interested in a diffuser if it's been put through a computational fluid dynamics analysis.

nelsonzep 04-05-2017 02:22 AM
sorry no cfda yet working on getting some done.

Summerwolf 04-05-2017 08:14 AM
What do the diffusers look like?

nelsonzep 04-12-2017 02:54 AM
3 Attachment(s)
Heres photos of splitter/diffuser installed


All times are GMT -4. The time now is 10:14 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.