New ProTEKt skidplate kit for the Scion FRS RS1
 

Hey guys, I would like to introduce you to our latest application, the Scion FRS RS1 skidplate kit.

I know that the RS1 lip kit is very low, and also super expensive, so it seems like a natural for our product. just like all of our kits, the RS1 kit is CNC machined from super low friction, high wear resistance High Density Polyethylene plastic, and includes all the necessary hardware to mount it up. I've sold a few already, and so far everyone is pretty pumped about the fit.

Anyways, here are some picks for you to check out, and as always feedback is welcomed.

thanks.

http://www.ft86club.com/forums/pictu...ictureid=10609



http://www.ft86club.com/forums/pictu...ictureid=10612



http://www.ft86club.com/forums/pictu...ictureid=10611


http://www.ft86club.com/forums/pictu...ictureid=10614

Nice. Are you able to make custom versions? I have a Nur spec front coming that I'd love to protect.

PM sent

what about the brz!?

To me? I didn't receive anything.

we make em for the BRZ!

check the website, or you can buy them from my Ebay store.

OK,

I tried again, let me know if you get it!

Super happy with my protekt plates! Scraped them like crazy and didn't even have to worry about my lip. Definitely worth the price.

Thanks protekt. They also have REALLY GOOD CUSTOMER SERVICE!

http://uploads.tapatalk-cdn.com/2016...c288347d82.jpg

http://uploads.tapatalk-cdn.com/2016...16487f5239.jpg

Sent from my SM-G930T using Tapatalk

I lent my car to Mitch to make the prototype of this kit and even at that stage it was high quality. It saved me from many situations that could've caused big damage to my lip. It also improves the sturdiness of the RS1 lip as well which was a big deal. Very well made product and great customer service from Mitch.

Hopefully he can help me work his magic with my new setup soon ;)

Thanks for the props, guys.

When you spend this much time and effort on something, it is pretty rewarding when folks go out of their way to say they like it.

"Like" is an understatement 😏

Sent from my SM-G930T using Tapatalk

[QUOTE=MikoV;2777378]"Like" is an understatement 😏

Ha Ha!

Thanks Miko.

post a pic after some use, and show us how its holding up.

[quote=mitch t;2779686]Once I get it back on a lift I'll get a proper shot!

Sent from my SM-G930T using Tapatalk

After a few weeks of constant beating and nasty driveways it seems like the skid plates itself didn't take any damage..the quality of the plastic used is like no other. I think this will protect my lip for eternity.

I don't think I'll ever run out of this lol.

http://uploads.tapatalk-cdn.com/2016...42304b5b84.jpg

Sent from my SM-G930T using Tapatalk

Thanks.

Yea the material is super specific. we did a bunch of testing to figure out what the best stuff is to make them out of, and we ended up going with High Density Polyethylene.

It is a lot more expensive than some of our other options, but we use it for 2 reasons.

1. It is super slippery, and slides with less effort than anything else we tried, which reduces the force trying to pull the bumper off the car during the scrape.

2. It's wear properties are amazing. I don't think that you could wear a set out, even after years of use. (I've never had anyone ask for a replacement yet, and some of them have been out there for 3 years or so)

Hey guys,

I'm running an FT86club exclusive sale on all of our products for the 86 twins.

you can check it out here,

http://www.ft86club.com/forums/showthread.php?t=113820

Bump!

Sale bump!

That looks like West End Alignment :)

ust a reminder that we are running a sale on all ProTEKt skidplates for the FRS and BRZ, over in the classified section.

quantites are limited so get them now!

http://www.ft86club.com/forums/showthread.php?t=113820

make any for an aimgain front bumper?

I don't have any specifically for the Aimgain bumper, but it looks like the regular FRS parts might be a good fit.

Anybody with an Aimgain lip in the Los Angeles area, so I can get a look at it?

Thanks!

You will likely never wear them out. we make them out of High Density Polyethelene, which is $pendy but has great wear characteristics.

Also, we will be rolling out a lifetime warranty on all skidplates in the next few weeks, that will apply to any past customers as well. You will never need to buy a replacement, as long as you own your car.

Will these fit on the 2017 BRZ with the STI lip?


Sent from my iPhone using Tapatalk

Not yet!

I'm looking for a 2017 BRZ in the Los Angeles area for prototype work, though.

if you know anyone, send them my way!!

Just to make sure...Does it require drilling? Or it uses existing holes?

Yup, drilling is required for the RS1.

The lip kit doesn't have any holes in it for me to use.

How will these fit the JDM TRD lip?
And how is the Shipping to Norway? :p

I haven't had one of the JDM lips here in he shop, so I can't say for sure, but it does look really close, and the plates are pretty easy to modify using a bandsaw and a sander.

Might be able to work out something on shipping as I work on Freddy Aasbø 's US drift car, and i know he goes back and forth pretty often.

Okay, I don't live that far from Aasbø here in Norway actually :)

But thanks for the info, gonna put this on the list over future parts to buy :D
:thanks::cheers: