Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Bolt-Ons (https://www.ft86club.com/forums/forumdisplay.php?f=60)
-   -   OEM fuel system parts altenator pulleys etc (https://www.ft86club.com/forums/showthread.php?t=111092)

charged86 09-27-2016 10:29 AM

OEM fuel system parts altenator pulleys etc
 
I have several oem engine parts left over from my turbo built engine build they include the following $500 for everything plus ship or best offer. willing to sell individually.

OEM:

manifold
throttle body
upper engine harness
alternator
alternator bracket
tensionor pulley
Fuel injector ECU
port injectors with stock rails
another set of factory injectors
set of coil packs
both knock sensors

AFTERMARKET
Sold

http://i1357.photobucket.com/albums/...psh6xqnww4.jpg

charged86 10-03-2016 12:24 AM

Bump

Ultramaroon 10-03-2016 12:27 AM

The DI computer is factory calibrated to compensate for the variance in each of the direct injectors. Are you selling those as a set?

charged86 10-03-2016 01:57 PM

Quote:

Originally Posted by Ultramaroon (Post 2766604)
The DI computer is factory calibrated to compensate for the variance in each of the direct injectors. Are you selling those as a set?


I have them as well. I was able to swap computers from the pullout motor i bought which was bad and used my original computer. Where did you read that. because you can order DI injectors and there is no recomondation to purchase a new computer. They arent even sold as a set.

Ultramaroon 10-03-2016 05:00 PM

Quote:

Originally Posted by charged86 (Post 2766895)
I have them as well. I was able to swap computers from the pullout motor i bought which was bad and used my original computer. Where did you read that. because you can order DI injectors and there is no recomondation to purchase a new computer. They arent even sold as a set.

http://www.ft86club.com/forums/showt...54#post2713154

I take @Spartarus' words as gospel but I'll look for "official" references to this tonight.

Please accept my apology in advance if I fail to confirm.

charged86 10-03-2016 05:36 PM

Quote:

Originally Posted by Ultramaroon (Post 2767058)
http://www.ft86club.com/forums/showt...54#post2713154

I take @Spartarus' words as gospel but I'll look for "official" references to this tonight.

Please accept my apology in advance if I fail to confirm.

the injectors that go to that icu i believe are still mounted on my built motor which i will part out soon. But i was unaware they all match.

Spartarus 10-03-2016 09:53 PM

Quote:

Originally Posted by charged86 (Post 2767083)
the injectors that go to that icu i believe are still mounted on my built motor which i will part out soon. But i was unaware they all match.

I'll clarify.

According to the manual

Each direct injector has a stratified flow number stamped on it. These must match the number programmed into the IDU for each cylinder.

There are separate part numbers for each version of the direct injector, starting with SU00304460 for the ones stamped "1"

The IDU is still useful if you simply put a sticky note on it with cylinder number and injector stamp number. For each of the 4 cylinders.

charged86 10-04-2016 11:05 AM

@ichitaka05 can i ask what happened to the classifieds? this is the second set of things i am currently selling. both threads have people coming on my thread throwing doubt and misconceptions at the items i am selling. I am simply selling an Item. I am following the rules set forth by the moderator. I dont understand why its ok to come where i am selling a item and the person who has no intention of buying my item comes on here and saying this and that. That dosent seem fair. If you arent looking to purchase my item how is it fair to come on my thread and say oh hey you cant sell that because blah blah blah. I am not out here to deceive anyone at anytime for any amount of money. If you dont like what im selling MOVE ON.


Quote:

Originally Posted by Spartarus (Post 2767244)
I'll clarify.

According to the manual

Each direct injector has a stratified flow number stamped on it. These must match the number programmed into the IDU for each cylinder.

There are separate part numbers for each version of the direct injector, starting with SU00304460 for the ones stamped "1"

The IDU is still useful if you simply put a sticky note on it with cylinder number and injector stamp number. For each of the 4 cylinders.


ichitaka05 10-04-2016 12:56 PM

Quote:

Originally Posted by charged86 (Post 2767539)
@ichitaka05 can i ask what happened to the classifieds? this is the second set of things i am currently selling. both threads have people coming on my thread throwing doubt and misconceptions at the items i am selling. I am simply selling an Item. I am following the rules set forth by the moderator. I dont understand why its ok to come where i am selling a item and the person who has no intention of buying my item comes on here and saying this and that. That dosent seem fair. If you arent looking to purchase my item how is it fair to come on my thread and say oh hey you cant sell that because blah blah blah. I am not out here to deceive anyone at anytime for any amount of money. If you dont like what im selling MOVE ON.

Not sure about other thread, but this thread I didn't see any issue. They asked a question & clarified the reason why asking that question. They're not doubting or stating you're scamming.

charged86 10-08-2016 01:21 PM

bump


All times are GMT -4. The time now is 04:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.