2017 BRZ front bumper conversion 2014MY
 

alright, a few of you guys have shown interest in a DIY write up on facebook, so here ya go.

on mine, i also modified the foglight trim to accept the 2014 DRL lights, as i dont have fog lights and wanted to keep them. i wont be covering that too much as i dont have it mounted in there as cleanly as i would like just yet, but ill update this when i get around to it.
ok. so. first is the parts list.....
you will need the bumper, headlight housings, grille mustache piece, fog light trim, and the little side pieces next to fog light trim.
part numbers are as follows
57731CA450
57731CA460
57731CA470
57702CA280
57707CA180
57707CA190
57731CA350
57731CA360
subaru part numbers (north america, though i doubt they change them)

you will also need to either transfer the corner light bracket from the old bumper, or get new ones. i transferrred mine pretty easy, just drill out the rivet and rivet it onto the new one.

headlight brackets bolt right up

once headlight brackets are on, the 17 bumper attaches like oem. all bolt/clip holes line up, snaps right into place, just like putting your old one back on. pretty easy huh? lol.

pics

https://photos.google.com/photo/AF1Q...tFdpxkBxKD4avg

fog light housing modification

https://photos.google.com/photo/AF1Q...d5aM_p_nAxzGjM

https://photos.google.com/photo/AF1Q...8oe0ixoIOpIQLh

https://photos.google.com/photo/AF1Q...KCOtOZAixr0Ws6

https://photos.google.com/photo/AF1Q...2x_uLSI2yrQ0YG

picking it up from the paint shop! paint match came out perfect. shouts out to abra collision in tacoma!

https://photos.google.com/photo/AF1Q...-KW4Yy9meuMZA4

test fit

https://photos.google.com/photo/AF1Q...abXi0nkXrqJXnq

https://photos.google.com/photo/AF1Q...n0UBlluasSgKmd

DONT PUT YOUR BUMPER ON WITHOUT PUTTING ALL THE TRIM ON FIRST
the mustache grille piece clips in from the backside, and the fog light trim can be a little pain in the ass to clip in on the inside corners. wish i would have taken pics, but its pretty easy to figure out on your own.

grrr. looks like a race car :burnrubber:

https://photos.google.com/photo/AF1Q...5L2jz2hHQhY9j8

heres a little pic i took of starting the drl modificaton to the bumper. this part is not seen with trim pieces in place and the light in place, so if i ever decide to back out of this part of the project i can always get fog lights (with new trim, of course) or the no-fog blank trim and nobody would ever know any different. since this picture was taken, i took an air saw to it and cut basically following that shape, little by little until the light had a good even mounting depth to it. i may need to do more modifications here (including mounting the light, haha! getting some metal or something in the next couple days to fab up some kind of solid mount. until then, zip tie all the things!!!:bonk: )

https://photos.google.com/photo/AF1Q...7iFgvamki5EY1g

you can see the gaps i need to fill if you zoom in on the following few pics, but from standing by the car most cant tell (unless theyre people like us, who care and would pay attention to detail lols)

https://photos.google.com/photo/AF1Q...1zpvLiZzHBSRES

https://photos.google.com/photo/AF1Q...saYG7XNAEmzdl1

https://photos.google.com/photo/AF1Q...FYgIk2YayrcO2H

https://photos.google.com/photo/AF1Q...c7svRGwzYFthAp

put it on. need to go to work and get a new badge and put my licence plate on. fucks no im not drilling holes in the new bumper!!!!

https://photos.google.com/photo/AF1Q...OXfVhFQ1ZpC_87

https://photos.google.com/photo/AF1Q...SWVAHP8cnMzjjC

and finished, just in time for #FrontEndFriday !! im stoked, it looks bad ass!!! and it looks pretty factory as well. a good upgrade in my opinion. then again i did it all for employee cost and got painted by the homie hookup so thats why i dont include prices lol. i will add on to this later when i get the DRL mounted as cleanly as i would like. im also going to do the DRL always on mod too, personal preference.

https://photos.google.com/photo/AF1Q..._hqckGfXYLLfa7

https://photos.google.com/photo/AF1Q...Dd-bzomtFoGwhw

https://photos.google.com/photo/AF1Q...zQFs9WTg9U14_i

https://photos.google.com/photo/AF1Q...b3Rcue1GbcRmqZ

https://photos.google.com/photo/AF1Q...7146OOocmQDb5B

there ya go. feel free to shoot questions below ill try to keep checking this and replying.

no, i do not know about the 17my headlights, and honestly dont plan on trying just because i like the 2014 better, but we will seeeeee.... enjoy!!:burnrubber::burnrubber:

pics may be out of order, it was a pita resizing and shit i tried to post links but i dont think that worked lol. anyways

Excellent job, looks great! What's the total cost on this?

-Josh

Nice write up! though a bunch of the pictures early on aren't showing for me.
Would the same parts work for an FRS/GT86?

Nice write up!

BZ on that BRZ. Well done.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[quote=Ricks919;2760091]alright, a few of you guys have shown interest in a DIY write up on facebook, so here ya go.

on mine, i also modified the foglight trim to accept the 2014 DRL lights, as i dont have fog lights and wanted to keep them. i wont be covering that too much as i dont have it mounted in there as cleanly as i would like just yet, but ill update this when i get around to it.
ok. so. first is the parts list.....
you will need the bumper, headlight housings, grille mustache piece, fog light trim, and the little side pieces next to fog light trim.
part numbers are as follows
57731CA450
57731CA460
57731CA470
57702CA280
57707CA180
57707CA190
57731CA350
57731CA360
subaru part numbers (north america, though i doubt they change them)


If you don't wanna reveal the cost of paint and service that's cool, but what was the cost for just the parts? I am in the process of debating this retrofit myself and this all factors into my cost benefit analysis.

Excellent write up tho! Many thanks to you for being the community trail blazer and getting this done! :clap::clap::clap:

Also, do you remember if there were mounting brackets/ holes in the back of the bumper for an STi badge? The old model year bumper had a bracket moulded into the bumper. I am hoping I can transfer my STi badges over to the MY17.

Great write-up. Did you have any thoughts about ditching the stache and doing a custom grille for the bigger opening without the stache? It's a separate piece on that bumper cover, correct?

It's the one thing I really dislike about my BRZ, and I plan to cut that bitch off some day and do a custom grille. My car is black, so the stache is somewhat camouflaged, and I've added the GrillCraft grille in black - I'd love to have your new bumper minus the stache and plus a custom stainless mesh grille with the licence plate centered. My car has a little too much black on the front end - needs a little bling.

You've got me thinking now.

Thanks.

Wow nice

This is awesome, where did you pick up the 2017 bumper from?

Good job!

nice like it

Did the connection to the side of the bumper bi the fender change? IE fixes the gap issue or still a concern?

I'm waiting for someone to post up a tutorial for the new 86 bumper. Great write up though! 👌🏾


Sent from my iPhone using Tapatalk

are you able to do a comparison of the new bumper mustach to the old bumper ?

I'm sure it would be just about the same process.

Looks great, nice work OP!

Thank you OP!

Somehow I don't think there will be nearly as much interest for DIY guides on how to put the 2017 86 front bumper onto the 2013-2016 FRS, lol

Good job. I would be interested, how the 2017 headlights looks with 2016 bumper.

I think that's a safe bet. :thumbdown:

damn, i been sluffin on replying on here haha. my bad. alright theres a lot of q's so im going to answer all (pg1) in this one comment. lets see....
@kuzkynskika MY total cost was around 650 said and done... yes i think the mounts are there however my brz didnt have the sti badge so i cant completely vouch.
@GReezer itll be interesting to see what the aftermarket brings. im not quite that crafty..
@Bowen local subaru dealership (ie my job)
@Bramick i never had that problem but it seems pretty sturdy. i think they added 1 tab to it but i cant remember now.
@31x86 its probably the same procedure, get headlight brackets and bumper from 2017 86 and should work (probably).
alright guys until next time, hope to see more of these done i guess haha looks good with 2014 lights IMO

so has anybody else done this yet or am i still the only one haha. pics!

I mean... I'm planning on it... but not yet ha.

Mine's being painted and worked on right now.. Hopefully the body shop will have it done next week.

I did the conversion ! Attachment 145299


Sent from my iPhone using Tapatalk

I'm in the process with some modifications http://uploads.tapatalk-cdn.com/2016...a27feb60a2.png

nice...still i like first generation looks than 17

Can't wait to see how it turns out... I really like the '17 bumper.

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

How much was this swap? Especially the new bumper cover itself and where did you get it?

P/N 57704 I guess? Cover alone is $225? Interesting.

Looks awesome!

Can you fix the links for the photos by the way? Most of them are not displaying.

If anyone wants to know how much it'll cost in parts from subarupartsdepot.com

http://i.imgur.com/1rH7iUk.jpg

How did you get to the 2017 parts on subarupartsdepot.com? When I click on or select 2017, it seem to not show any vehicles available.

Edit: never mind. Searching by part number worked.

Edit2: In case anyone is interested, here are the part numbers for the 2017 left and right fog lamps:

FOG LAMP ASSY F RH: 84501CA000
FOG LAMP ASSY F LH: 84501CA010

anyone successfully purchased from subarupartsdepot.com? was also wondering if anyone got the headlights from them?

I just got a 2017 but it does not have any fog lights.
Can someone confirm the part number for the OPEN fog light covers.
I got thses part numbers:
57731CA350
57731CA360

https://i.imgur.com/oM9p1b3l.jpg

If anyone wants to use the factory 17 fog lights the part numbers are below. I'm looking for the name of the connector now. If I find it, I will reply.

84501CA010
84501CA000

Update on my 2017 Bumper mod
 

I decided to keep my running lights as running lights and a little throwback to old Subi bumper fog lights. I just need to make a bracket to hold the fog lights on. The running lights w/ plastic insert will be adhesive together. This should be painted and finished within a week.

https://i.imgur.com/RkIEGiQ.jpg

https://i.imgur.com/6FTUZHL.jpg

https://i.imgur.com/UEwOVx9.jpg

Got enough light you think? That'll be unique for sure. Curious to see how it turns out.

Also, you can probably answer a question for me: any way you can imagine removing the center part of the assembly (mustache, etc) with the bumper cover on the car? I'm guessing not, but... till I know not, there's hope!

If the bumper bar wasn't exposed with the center grill missing I would have probably done it

Update. I got the first coat on the bumper. Also painted the intercooler black w/ new support mod ($10) done to delete that damn bumper droop that's caused by the intercoolers weight. She's getting close!

https://i.imgur.com/8TEMLEH.jpg

https://i.imgur.com/BeqVmYp.jpg