First time Rocket Bunny kit/install fitment
 

What's up guys, I finally got my rocket bunny kit v1 getting installed this week and having the paint done hopefully this weekend. I got enkei rs05rr wheels that are 18x10.5 +15 squared with air ride. My question is if I run a 25mm spacer on all sides, how will the rear look? I'm doing the exact same set up is this http://www.speedhunters.com/2012/10/...ket-bunny-frs/ , it looks like 25mm in the rear, but I can't tell what the rears are... Also he is running +22 and my wheels are +15.

So how will a -10 look like on the rears any pictures please?
Also if it doesn't look almost to looking flushed, can I double up 25mm x2 in the rears? Need help.

Looks like he's got a pretty thick spacer on there, possibly even adapter? Maybe one of the RB experienced can chime in and help out

This might help you out as well! http://www.ft86club.com/forums/showp...1&postcount=13

From this thread http://www.ft86club.com/forums/showthread.php?t=20429

RS05RR 18x10.5 +15
For flush fitment you would need:
25mm 5x100 to 5x114 spacer
Then an additional 25mm spacer
Effectively, 18x10.5 -35.