Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Tracking / Autocross / HPDE / Drifting (https://www.ft86club.com/forums/forumdisplay.php?f=39)
-   -   Post a pic of your installed Autopower roll bar (https://www.ft86club.com/forums/showthread.php?t=109768)

Takumi788 08-19-2016 01:06 PM
Post a pic of your installed Autopower roll bar
 
I have done some searching for Autopower roll bar pics on here and google but it seems most people are getting there roll bars/cages elsewhere. If you have an Autopower roll bar I would greatly appreciate some install pics for my decision making. If you have a comparable solution to the Autopower cage, that would also be appreciated.

DavidBob 08-19-2016 02:05 PM
I have their four point cage if you'd like I can snap some pictures and post them up here

GSpeed 08-19-2016 02:34 PM
http://www.ft86club.com/forums/showthread.php?t=108377

We've got one in the pipeline. This thread shows some of the design & renders, and we should be starting work on the prototype this weekend or early next week.

Apex-Apex 08-19-2016 02:55 PM
http://i.imgur.com/ccxEfVp.jpg
http://i.imgur.com/QNayMqw.jpg
http://i.imgur.com/x7OK1nc.jpg

Takumi788 08-19-2016 03:20 PM
Quote:
Originally Posted by GSpeed (Post 2733244)
I have seen this thread and was intrigued at first. But I am guessing yours will cost more than the Autopower and the only benefit to yours is to keep some of the stock interior.....which is already gone in my car. Am I wrong? Feel free to try and sway me.

Quote:
Originally Posted by Apex-Apex (Post 2733268)
This is an Autopower cage!? I am asking bc it looks different than the pics on their website. If so I am sold. I like it.

Quote:
Originally Posted by DavidBob (Post 2733216)
I have their four point cage if you'd like I can snap some pictures and post them up here
Please do!

Sleepless 08-19-2016 03:29 PM
Quote:
Originally Posted by Takumi788 (Post 2733294)
I have seen this thread and was intrigued at first. But I am guessing yours will cost more than the Autopower and the only benefit to yours is to keep some of the stock interior.....which is already gone in my car. Am I wrong? Feel free to try and sway me.
The Autopower requires welding a plate for the front mounts. That is a key difference.

Apex-Apex 08-19-2016 03:47 PM
Quote:
Originally Posted by Takumi788 (Post 2733294)
I have seen this thread and was intrigued at first. But I am guessing yours will cost more than the Autopower and the only benefit to yours is to keep some of the stock interior.....which is already gone in my car. Am I wrong? Feel free to try and sway me.



This is an Autopower cage!? I am asking bc it looks different than the pics on their website. If so I am sold. I like it.



Please do!
Mine's slightly modified. Added the rear X with gussets and welded the legs but it's essentially an Autopower cage.

zdr93523 08-21-2016 04:34 AM
I have the full Autopower cage. The main hoop is welded to the footer at the leading edge of the rear seat / gas tank. The door bars are also welded in.

FRS Justin 08-23-2016 04:12 AM
ok how can the bar be ahead of the b pillar on the last pick and behind it on the first pic?..... smh
The cage is not installed
I do like the design but fitment cant be determined

Takumi788 08-23-2016 08:05 AM
Quote:
Originally Posted by FRS Justin (Post 2735577)
ok how can the bar be ahead of the b pillar on the last pick and behind it on the first pic?..... smh
The cage is not installed
I do like the design but fitment cant be determined
I think this may be a trick of perspective. But I will let Apex-Apex clarify things further. It looks fine to me but maybe it was just set in the car for positioning?

MarkR171 08-23-2016 12:46 PM
Quote:
Originally Posted by FRS Justin (Post 2735577)
ok how can the bar be ahead of the b pillar on the last pick and behind it on the first pic?..... smh
The cage is not installed
I do like the design but fitment cant be determined
Perspective. Look at the driver side pillar on the bottom picture.

brz11b 08-23-2016 01:15 PM
I love it and i want one!

GSpeed 08-23-2016 01:39 PM
Quote:
Originally Posted by Apex-Apex (Post 2733316)
Mine's slightly modified. Added the rear X with gussets and welded the legs but it's essentially an Autopower cage.
How is rear visibility with the rear X? We thought about adding that to our design (still might) but we were worried it would make it too hard to see out the back, due to how high the rear attachment points are.

Jake

Panamaniac 08-23-2016 03:29 PM
I have an Autopower Roll Cage installed.
What pictures do you want?


http://i.imgur.com/4vKknvI.jpg


All times are GMT -4. The time now is 08:52 PM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.