Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Louder rumble? (https://www.ft86club.com/forums/showthread.php?t=109644)

FR-Sky 08-16-2016 01:05 AM

Louder rumble?
 
Currently i am running oft stage 2, borla UEL header, stock overpipe, stock front pipe and stock exhaust. But the rumble sound doesnt kick it after 4-5k rpm.

Is there anyway to make the rumble little bit louder without changing the stock exhaust? I kinda like the 2015 JDM exhaust tip.

Thanks

swarb 08-16-2016 01:54 AM

Quote:

Originally Posted by FR-Sky (Post 2730113)
Currently i am running oft stage 2, borla UEL header, stock overpipe, stock front pipe and stock exhaust. But the rumble sound doesnt kick it after 4-5k rpm.

Is there anyway to make the rumble little bit louder without changing the stock exhaust? I kinda like the 2015 JDM exhaust tip.

Thanks

Yes. Replace the stock parts.

Tcoat 08-16-2016 01:59 AM

Get rid of the over and front pipes but keep the rest.
Or
Get a cat back with similar tips and keep the rest.
Or
All of the above and bug the crap out of your neihbours.

ryoma 08-16-2016 02:50 AM

you MIGHT notice a difference if you go with an aftermarket front pipe with a resonator. maybe. or find an aftermarket catback that have tips you like

RichardsFRS 08-16-2016 07:01 AM

The best sound to me is the high rpm F1 sound! Can't beat that sound. Otherwise its a 4cyl so it won't have much rumble

finch1750 08-16-2016 11:33 AM

swap the front pipe (and maybe the overpipe)

kch 08-16-2016 01:09 PM

Quote:

Originally Posted by FR-Sky (Post 2730113)
But the rumble sound doesnt kick it after 4-5k rpm.

The car will naturally sound less rumbly the higher in RPM you get. When I'm on the track and hanging out around 5-7k, my UEL doesn't really sound that different from an EL header.

FX86 08-16-2016 01:36 PM

for the unmodded masses: remove the stock muffler and....done! (don't forget to throw the muffler into the trash also)

JazzleSAURUS 08-16-2016 01:47 PM

1) Buy an aftermarket frontpipe, (you will get more rasp if you go catless, or one of the single resonated deals.)
2) Have a muffler shop swap the stock muffler out for something like a flowmaster. Should be cheap and easy.

FR-Sky 08-16-2016 03:37 PM

Quote:

Originally Posted by JazzleSAURUS (Post 2730495)
1) Buy an aftermarket frontpipe, (you will get more rasp if you go catless, or one of the single resonated deals.)
2) Have a muffler shop swap the stock muffler out for something like a flowmaster. Should be cheap and easy.

Yea but i dont want it sounds like tin can fart lol

FR-Sky 08-16-2016 03:39 PM

Quote:

Originally Posted by finch1750 (Post 2730357)
swap the front pipe (and maybe the overpipe)

Will it give me the tin can fart sound?
I had a N1 before install the borla header, the reason why i remove the n1 is because of exhaust sound louder than the rumble sound.

AdrianSaldana 08-16-2016 04:16 PM

Quote:

Originally Posted by RichardsFRS (Post 2730208)
The best sound to me is the high rpm F1 sound! Can't beat that sound. Otherwise its a 4cyl so it won't have much rumble

do we have a exhaust that makes that sound for us? :iono:

Cole 08-16-2016 04:19 PM

Quote:

Originally Posted by Tcoat (Post 2730142)
Get rid of the over and front pipes but keep the rest.
Or
Get a cat back with similar tips and keep the rest.
Or
All of the above and bug the crap out of your neihbours.

Too lazy to look through the thread, but the OP won't do a whole lot for noise. Otherwise, yes

finch1750 08-16-2016 04:40 PM

Quote:

Originally Posted by FR-Sky (Post 2730593)
Will it give me the tin can fart sound?
I had a N1 before install the borla header, the reason why i remove the n1 is because of exhaust sound louder than the rumble sound.

the N1 itself does that. Stay catted with the FP and keep the stock OP and see how you like it.

Or try a different catback like the Q300 or Perrin 2.5 resonated with just the header.

But know this car will never really rumble (like a turbo Subaru thats seen as the Subi rumble everyone refers too). I have tried and given up on that lol

I have Tomei UEL, Motiv OP, Berk hfc fp, and q300. It sounds like a tin can between 2k-3k but good everywhere else. Im ditching the UEL cuz im never gonna get the rumble I want


All times are GMT -4. The time now is 06:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.