Help: Rydeen Duo backup cam image upside down o
 

I installed the Rydeen Duo over a year ago and everything was rosy. Today the image is suddenly upside down.

Any ideas on how to fix this? Is there a switch on it somewhere in case the camera is installed upside down? I'm not sure how a switch could have been triggered, but it must have been something.

Any help is much appreciated.

there's a wire that controls the orientation of the picture. you cut it and it flips it 180, or if you leave it connected it's the default orientation. sounds like the wire was pinched over time where you routed your wires and flipped the picture. look over your wire routing and see if there's any area that's really tight and might have pinched the wire.

If I'm not mistaken, that wire is only responsible for the mirror image (180° horizontal flip). Cutting the wire will not flip the image vertically (upside down).

Nah, my Rydeen Duo flipped vertically with the wire.

Bump id like to know the answer to this as well.

I installed my camera I tried to get rid of the mirror image by connecting the white wires and it flips the image upside down. Is there a proper way to do this?