Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Issues | Warranty | Recalls / TSB (https://www.ft86club.com/forums/forumdisplay.php?f=72)
-   -   Shifter rattle? (https://www.ft86club.com/forums/showthread.php?t=108972)

ThisGuyRett 07-29-2016 08:36 AM

Shifter rattle?
 
Hey guys, so I have been noticing that there is a rattle when going into neutral and slowing down. It is noticeable at slowing down around 20mph-below. It does last long, probably a second or two, but it is noticeable. Anyone else experience this?


I know there is a tsb for it but it is only for '13 models before a certain production date. Mine is a '15.

Yoshoobaroo 07-29-2016 09:30 AM

Sounds like flywheel chatter, it's normal and doesn't hurt anything.

-Josh

ThisGuyRett 07-29-2016 10:33 AM

Quote:

Originally Posted by Yoshoobaroo (Post 2716097)
Sounds like flywheel chatter, it's normal and doesn't hurt anything.

-Josh



Right on. Makes me feel a lot better. I don't like unexplained noises lol

Joyride86 07-29-2016 11:51 AM

Yeah it's flywheel chatter. I've seen it quite a few times on the forums and I can replicate it on my car. You can either not do a neutral coast at that high of a speed by just leaving it in gear or hold the clutch down for an extra second after shifting to neutral.

Yoshoobaroo 07-29-2016 11:53 AM

Yea it should go away when your hold the clutch in.

-Josh

FX86 07-29-2016 12:02 PM

could be a rattlesnake inside your shift boot...watch yourself

Yoshoobaroo 07-29-2016 01:31 PM

Haha.. Snake in boot.. Hejehe

-Josh

ThisGuyRett 07-29-2016 04:11 PM

Lol Thanks for the info guys.

humfrz 07-29-2016 04:50 PM

Quote:

Originally Posted by Yoshoobaroo (Post 2716097)
Sounds like flywheel chatter, it's normal and doesn't hurt anything.

-Josh


hmmm..........how can a flywheel "chatter" ....... when it's bolted to the crankshaft ....... ??

;)


humfrz

Yoshoobaroo 07-29-2016 10:07 PM

Quote:

Originally Posted by humfrz (Post 2716557)
hmmm..........how can a flywheel "chatter" ....... when it's bolted to the crankshaft ....... ??

;)


humfrz

It's dual mass, only half of it is bolted to the crank ;)

-Josh

humfrz 07-30-2016 05:04 AM

Quote:

Originally Posted by Yoshoobaroo (Post 2716821)
It's dual mass, only half of it is bolted to the crank ;)

-Josh

Well, I'll be darned ....... I did not realize that ..... :bonk:

Thanks, @Yoshoobaroo for helping to pull ol humfrz out of the 50s ....... :thumbsup:


humfrz

Yoshoobaroo 07-30-2016 12:23 PM

Quote:

Originally Posted by humfrz (Post 2717021)
Well, I'll be darned ....... I did not realize that ..... :bonk:

Thanks, @Yoshoobaroo for helping to pull ol humfrz out of the 50s ....... :thumbsup:


humfrz

:lol:


All times are GMT -4. The time now is 03:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.