= YOYO's Project EightSix build thread =
 

Hey guys, thanks for checking out my thread! I've been on these forums for a little bit now, posting here and there, but I have never actually had the chance to post up my own build thread, that is until now. My previous project car was a 2003 Acura RSX Type-S, which I sold in the summer of 2015. My current car is a 2014 Whiteout FR-S, which I purchased used at the end of November 2015. Besides the tint, it came bone stock with just under 16 000km on the odometer.

This is the car when I bought it, minus the Perrin antenna which I installed the day that I brought it home.

http://www.studioqube.com/forums/FT8...yo_stock01.jpg


Below is a list of my current mods, along with some photos, which I will do my best to update periodically.


Suspension

HKS Hipermax IV SP Coilovers
SPC adjustable rear lower control arms
Beatrush strut bar and strut tower brace

Wheels / Tires

Gram Lights 57DR – 17x9 +38 / Gunblue
Mishimoto Neochrome extended lug nuts
Yokohama S Drive – 245/40R17

Performance

HKS Leggamax Supreme catback axhaust
Tomei Expreme UEL header
Grimmspeed header gaskets
K&N drop in panel filter
OFT stage 2 tune

Exterior

Window tint
Five Axis Spoiler
Stillen lip kit
APR carbon fibre brake ducts
OE rear diffuser
Perrin 2in shorty antenna
Winjet blackout headlights + always on DRL mod
Morimoto 5500K HID kit
Valenti CR tail lights
LED bulb conversion conversion (dome light, trunk light, license plate lighting, reverse lights)
Rexpeed wide/blue side rear-view mirror lenses
Toyota exterior rebadge
Speedhunters aluminium license plate frames

Interior

Blitz induction kit
Grimmspeed pulley cover (stainless steel)
Raceseng oil filter cover and oil cap (orange)
Grimmspeed hood dampers
Raceseng x Speedhunters limited edition shift knob
Raceseng R-Lock
Perrin drift button (black anodized)
Cusco heel-toe pedal
RAZO 300mm rear-view mirror (convex type)
Subaru OEM carpeted trunk liner
Subaru door bolt head covers


Photos - 08/24/2016

http://www.studioqube.com/forums/FT8..._shoot4_01.jpg

http://www.studioqube.com/forums/FT8..._shoot4_02.jpg

http://www.studioqube.com/forums/FT8..._shoot4_03.jpg

http://www.studioqube.com/forums/FT8..._shoot4_04.jpg

http://www.studioqube.com/forums/FT8..._shoot4_05.jpg

http://www.studioqube.com/forums/FT8..._shoot4_06.jpg


Photos - 08/09/2016

http://www.studioqube.com/forums/FT8..._shoot3_01.jpg

http://www.studioqube.com/forums/FT8..._shoot3_02.jpg

http://www.studioqube.com/forums/FT8..._shoot3_03.jpg

http://www.studioqube.com/forums/FT8..._shoot3_04.jpg

http://www.studioqube.com/forums/FT8..._shoot3_05.jpg

http://www.studioqube.com/forums/FT8..._shoot3_06.jpg

http://www.studioqube.com/forums/FT8..._shoot3_07.jpg

http://www.studioqube.com/forums/FT8..._shoot3_08.jpg

http://www.studioqube.com/forums/FT8..._shoot3_09.jpg

http://www.studioqube.com/forums/FT8..._shoot3_10.jpg

Photos - 07/27/2016

http://www.studioqube.com/forums/FT8..._shoot2_01.jpg

http://www.studioqube.com/forums/FT8..._shoot2_02.jpg

http://www.studioqube.com/forums/FT8..._shoot2_03.jpg

http://www.studioqube.com/forums/FT8..._shoot2_04.jpg


Photos - 07/20/2016

http://www.studioqube.com/forums/FT8..._shoot1_01.jpg

http://www.studioqube.com/forums/FT8..._shoot1_02.jpg

http://www.studioqube.com/forums/FT8..._shoot1_03.jpg

http://www.studioqube.com/forums/FT8..._shoot1_04.jpg

http://www.studioqube.com/forums/FT8..._shoot1_05.jpg

Saved for future updates

Saved for future updates

I updated my thread with some new photos, including some engine bay shots. Vroooom :D Enjoy :thumbup:

Looks good!

Thank you :thumbsup:

I added some new photos. Really enjoying the car and bringing the camera along. You never know when you can come across an interesting shoot location.

Love your color choice! Car is definitely looking good! Jealous of your rims too!

Thanks, I really appreciate that! :D Love your build as well :thumbsup:

Very nice! I can already tell this build is headed in a direction I'm going to like. Looking forward to your future updates... Very good photography as well... I'm diggin' a lot of your pics!

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

Build is clean as hell. Great choice in parts, great detail.
Never stillen has such a subtle body kit.
Gotta say that HKS exhaust tip is huge.

Loving some of your photos! You should enter Aug POTM!

btw, how was Stillen lip kit fit? Perfect fit?

Thank you, I very much appreciate that :w00t: Really glad to hear you like the photos!

Thanks man! My last project car was all out crazy, so I wanted to keep it simpler and cleaner this time around.

To be honest, I was on a mission of digging up all the aero kits available for the 86 platform, even before the actual purchase of the car, and I came across the Stillen kit by chance. The very clean and subtle aesthetics were an instant win in my books.

Yup, the HKS tips are definitely on the 'larger' side :D . I wasn't originally planning on going this route, but I really liked how nicely they fit with the 'OE Diffuser'. The setup is nice and flush, and HKS product quality sure doesn't disappoint either. The exhaust is also very subtle in the sound department, and mated up with the Tomei UEL, it sounds absolutely fantastic. I get compliments on it all the time.

Thank you sir! Thanks for the suggestion, I'll definitely have a look :thumbsup:

The fitment on the Stillen kit is definitely excellent. I mean I could nit pick it here and there, but that's all it would really be, nit picking. It was probably the smoothest kit install that I had ever done.

Posted up some new pics today. I love sunsets, and I think I managed to grab some really neat shots of the car basking in the orange glow, on a local hillside road. Hope you like :thumbsup: