2013 BRZ Limited Bazooka Tube Install
 

Hi Guys,

I have an FA601US head unit in my 2013 BRZ and I was seeing what I need to install a 8" 100w bazooka tube in the trunk of my car.

An audio store told me that I need an 8 Gauge wire kit, but do I need a Fast 9999 adapter? Or more specifically the FAST 1761 Toyota adapter?

Also I'm pretty sure my headunit doesn't have RCA jacks...so is that what the FAST 1761 adapter is for or is that covered by the 8 Gauge wiring kit?

Thanks in advance!
Steve

The Bazooka BTA8100FHC sub with the installation kit comes with their universal Fast-9999 and BTAH installation harnesses. This is all you would need.

Current prices:
https://www.amazon.com/Bazooka-BTA81...oka+BTA8100FHC $197. shipped + tax?
https://jet.com/product/Bazooka-BTA8...7c9d572371d8d1 15% off first 3 orders

Here's my DIY install: http://www.ft86club.com/forums/showthread.php?t=107495

From this thread it looks like the 10 pin power and speaker plug, D14 in the first post, is wired the same as the one on my FR-S. See pic of D14 plug in post 2. http://www.ft86club.com/forums/showthread.php?p=746054

Battery Constant 12V+ Wire: Orange
Accessory Switched 12V+ Wire: Red
Left Front Speaker Positive Wire (+): Black
Left Front Speaker Negative Wire (-): Yellow
Right Front Speaker Positive Wire (+): White/Blue
Right Front Speaker Negative Wire (-): Black/Blue

D14 plug is on lower left.
http://i6.photobucket.com/albums/y24...EMheadunit.jpg

Thanks Ricky Bobby! After work I'm gonna tackle this thing.

Wish I offered the guy less for this used bazooka tube...it didn't come with either of those cables so I just ordered a new set online.

How did the install go? I just got a open box Bazooka MBTA10250D Marine 10-Inch 250 Watt, that doesnt come with the stupid cables too.. So I will have to get those also.

this come with Bazooka bubble gum?

This is a much bigger Bazooka :) I got the 250watt version... just hope it works when I get it. I have to use a different wiring harness also, but I should be able to just use the RCA outputs on my Joying.

I have a pair of DVC 6" Bazookas, a PPI 2050 amp, and a Carver Phantom bass processor that I was tempted to put in the BRZ, but have resisted. I'm afraid of the straps coming loose on the mountain twisties, plus I'm a bit anti weight now. The stuff is a bit old skool, from my minitruck days, but still works.

the car gets overbassed way too easily. I have the stock add on subwoofer, and even turned all the way down on the stock hu there are times it is just too much. Plus it just doesn't seemed tuned well for the car.

I have a feeling that mine will be tuned down also, but I have found that with stock speakers, it is missing some bass. I am by no means a bass head, but I do listen to a fair amount of EDM and rock. It seems flat sometimes and using poweramp with my joying and using the EQ to give it bass it seems to distort and feel muddy.

Also - one last note, coming from a TC that had the built in sub, I miss it sometime on certain songs when I am in the mood for a bass hit.