Ecutek Turbo basemap
 

does anyone have an unlocked ecutek base map for a turbo charge application?

im running stock injectors, stock exhaust, stock map sensor and a custom turbo kit. I need a base map to flash into the car so I can drive around and datalog safetly because taking it to a tuner.

your tuner should be able to get you a map to get you running.

I'm keen for a base map also

I think it was delicious that sells a flash and go tune for FI, but that being said I would not run that long term

he's asking for an unlocked basemap...
 

good luck finding that for ecutek...

Jaden

Their flash and go tune is ecutek but not unlocked

Your tuner should give you a base map. If not, you might want to find a different tuner.

Or you could just trailer the car to the tuner's shop.

Yeah it will be locked but at least the car is drivable

I would just tow it if I was you as finding any unlocked ecutek tunes is not easy

Their no such thing as a universal turbo basemap.

thinks like turbo size piping intercoolers injectors maf sensor and location and tube size, map sensors etc will all have infulence on type of base map needed.

you will need to talk to the tuner who is doing the job.

I believe JamesM (HRI) was selling unlocked base maps at one point, not sure if he still is though.

Unsure what OP is looking for but I was more looking for a base map to build/tune on rather than starting from scratch.

sbd turbo maps here

http://www.ft86club.com/forums/showp...21&postcount=1

What's your setup going to be?
I can send you my non-EcuTek Greddy T518Z files.
Drop in if you're up the road.

Hey cheers!! I'm not too far away from you actually. I haven't got anything set up yet (currently running sprintex) but looking at making my own turbo kit once I acquire a turbo of some description :D