Spec-d Headlights yellow bar as a turn signal?
 

Hello is it possible to wire the spec-d headlights yellow bar as a turn signal? Rocket bunny V2 deletes the front turn signal indicators on the FR-S and I believe legally you need them.
I haven't seen anyone do this but it must be possible, if anyone has any information please let me know :)

They have signals built into them I have them wired up in conjunction with my OEM signals.

When the turner signal is turned left or right the headlights do not flash that yellow bar in the headlight, Did you wire yours any certain way to make them do that? They were broken in a car crash and a new pair was ordered by dealer and installed that way and I dont remember if before hand if they ever flashed.

Yes you have to wire the turn signal lights (not the boomerang) to the OEM turn signal wire. I did mine so long ago I don't remember the colors of the wires so I am not much help there, but once its all said and done you have to wire the boomerang however you like, wire the signals up, and wire the high/low beams.

okay, me and the boyfriend are going to attempt to figure it out today haha. As of right now the yellow bar turns on when the white tube turns on.

Yea sounds like you have it wired to the park/drl.