Norcal86 86Day Block Party and Dyno Day
 

With the AE86 heritage running through our cars (and soon to be the name itself come August) we celebrate each year on 8/6 aka 86Day.

https://www.mann-engineering.com/med...er_revised.jpg

When: Saturday August 6 @ 10AM
Where: Mann Engineering
970 George Street
Santa Clara, CA 95054

This year we will be throwing a Block Party and Dyno Day at Mann Engineering in Santa Clara! We have our permit and have the street all to ourselves and we will have a food truck on site as well.

The event is FREE. You will need to pay Mann Engineering for dyno pulls and have cash for food trucks. But there is no cost to get on the street for parking and come to the event.

There are still rules!
No burnouts
No revving
No speeding
No loud music


Enter from the south end of George St (marked with an X below). Traffic will be one way to keep things simple and safe.

http://i54.photobucket.com/albums/g9...psixhek6sh.jpg

Dyno runs will be $60 for 3 baseline pulls with no tuning or datalogging. We want to make sure that we can get everyone who signs up in and out in a timely manner. We are going to have a limit of 12 pre-registered cars to make sure that we can get through everyone on time. If there is still time towards the end of the day to perform more baseline pulls, we will offer those who stick around the same price to baseline after we finish those who pre-register.

Reg link:
https://www.mann-engineering.com/ind...e-8-6-day.html

Dyno order:
Car No.1 2015 Scion FRS
Tony P.

Car No.2 2013 Scion FR‐S
Customer Alexander C.

Car No.3 2013 Subaru BRZ
Scott G.

Car No.4 2013 Scion FR‐S
Jonah S.

Car No.5 2016 Scion FR‐S
Joe M.

Car No.6 2014 Subaru BRZ
David L.

Car No.7
Jeffrey N.

Car No.8 2015 Scion FR‐S
Curtis O.

Car No.9 2013 Subaru BRZ
Plato M.

Car No.10 2013 Scion FRS
Robert E.

Car No.11 2014 Scion FR‐S
Daniel C.

Car No.12 2014 Scion FR‐S
Josh M.

Dyno session sign-ups:

1. @finch1750 - Jonah S.
Tomei UEL, Grimmspeed intake, Motiv OP, Berk HFC FP, Invidia Q300 catback, OFT 91oct Stg 2 tune

2. @Pwolf - Scott G.
Ft86 SF UEL Catted Header, Grimmspeed intake, Perrin 2.5 catback, OFT Stg1 91oct.

3. @PMok - Plato M.
JRSC, custom tune, stock exhaust

4. @xero404 - Jeff N.

5. @Sapphireho
JRSC w/custom tune

6. @Aussie - Rob
Open flash header, Open Flash Stage 2 OFH Tune

7. @_Se7en_
JSRC C30, ACE A350 Header/Overpipe, JDL Ultra Quiet Front Pipe, 2.5" Perrin Resonated Catback, Delicious Flex, Fuel Kit (Running E85 most of the time), DW700 CC injectors, DW300C Fuel pump, Custom tune

8. @GenRuleAThumb
JDL Unequal Length Header (catless), Top Speed Axelback, OFT Stage 2 UEL , E85

9. @Pish - Josh M.
JDL UEL Catless Header, HKS Highflow Air Duct, TRD Intake, Injen SES Exhaust, OFT Stg2 91oct.

10. Tony P.
Edlebrock SC, Borla exhaust, custom tune

11. @woomis - Joe.
Borla Catless UEL, Invidia N1 Titanium CBE, Invidia Resonated Front Pipe, Works Stage 2 Turbo, K&N Drop-in, DW700cc injectors and ECUTek RaceROM Custom Tune.

12. @lamune - David L.
JRSC, carb tune, Motiv FP and OP

Awesome! I remember the last event at Mann Engineering - their open house. It was a great day and we were all drooling over the brand new 2015 STi they had just recently purchased!

http://www.ft86club.com/forums/attac...1&d=1400396412

"A" food truck? come'on El Presidente, we gotta at least have 2!

j/k sounds like fun. Will the dyno runs be discounted? not saying I want or will dyno my car, just curious.

Yes, my understanding is that the dyno pulls will be discounted ... we will announce details and start a sign up list as we get closer.

UPDATE: Dyno runs will be $60 for 3 baseline pulls with no tuning or datalogging. We want to make sure that we can get everyone who signs up in and out in a timely manner. We are going to have a limit of 12 pre-registered cars to make sure that we can get through everyone on time. If there is still time towards the end of the day to perform more baseline pulls, we will offer those who stick around the same price to baseline after we finish those who pre-register.

Is there gonna be a charge like summer kickoff? Or free. Just curious

Great question. It will be free to attend. :thumbup:

But bring your money to buy lunch, car parts, or a dyno pull!
:D

Been meaning to get a new gasket for my Milltek catback.. could be an excuse to come :)

UPDATE: Dyno runs that day will be $60 for 3 baseline pulls with no tuning or datalogging. We want to make sure that we can get everyone who signs up in and out in a timely manner. We are going to have a limit of 12 pre-registered cars to make sure that we can get through everyone on time. If there is still time towards the end of the day to perform more baseline pulls, we will offer those who stick around the same price to baseline after we finish those who pre-register.

Are we gonna invite our friend from last year though?!?

Lol, dude was just doing his job. The question is are we gonna invite certain people who got him nervous (by revving, etc) in the first place ;)

This is why we now have an entire street closed off from the public with city approval

No! lol

Put me down for the dyno

Dyno reg link here:

https://www.mann-engineering.com/ind...e-8-6-day.html