Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Verus Engineering Billet Clutch Fork and Pivot (https://www.ft86club.com/forums/showthread.php?t=104963)

Ashikabi 02-28-2018 09:52 PM

Quote:

Originally Posted by VerusEric (Post 3051417)
We have not updated this thread in awhile but we have a new offering with the fork we are excited about. I know it is nothing revolutionary but we have now created an internal kit to offer with the clutch fork.

As some of you may know, Toyobaru issued a TSB for the TOB (throwout bearing). The grease within the TOB was found to be inadequate at dealing with the heat during operation, which causes premature failure. The Toyota/Scion TSB is S-SB-0012-17 if you would like to look it up.

Anyway, we now stock no less than 10 TOB and clips (shown below) that can be added on during checkout. https://www.verus-engineering.com/pr...30-clutch-fork

https://i.imgur.com/Q4q9KO9.jpg

https://i.imgur.com/BCq4SvC.jpg

Happy motoring! :burnrubber:

Thanks,
Eric

Is this an oem clip you stock or one you guys devised with additional performance over OEM?

VerusEric 02-28-2018 09:54 PM

Quote:

Originally Posted by Ashikabi (Post 3051420)
Is this an oem clip you stock or one you guys devised with additional performance over OEM?

100% OEM components. OEM 2017+ TOB, OEM spring clips. We're just trying to make it easier to grab a full fix in one shot with one shipping.

Ashikabi 02-28-2018 09:55 PM

Quote:

Originally Posted by VerusEric (Post 3051423)
100% OEM components. OEM 2017+ TOB, OEM spring clips. We're just trying to make it easier to grab a full fix in one shot with one shipping.

Gotcha

VerusEric 02-26-2020 05:31 PM

This thread hasn't been bumped in a while and we feel this is a really important part to install during any clutch install. We have these in stock with standard 2-day shipping in the USA.

Chuckls 02-26-2020 09:17 PM

Slated to be installed with your turbo kit!

VerusEric 07-05-2021 10:29 AM

Bump for anyone who hasn't seen this. This is one of our most popular items at this point and has helped a lot of owners maintain a more reliable car!

Qwimby1 07-06-2021 02:40 PM

Quote:

Originally Posted by Drakiv (Post 2636664)
Just a couple more people

I',m interested but have to replace TOB pretty soon so can't wait too long.

Olson1288 07-06-2021 06:53 PM

Quote:

Originally Posted by VerusEric (Post 3446768)
Bump for anyone who hasn't seen this. This is one of our most popular items at this point and has helped a lot of owners maintain a more reliable car!

Been using both the fork and the pivot in my turbo BRZ for almost 2 years now with no issues. :thumbsup:

mb_ 07-07-2021 04:01 AM

Quote:

Originally Posted by VerusEric (Post 3446768)
Bump for anyone who hasn't seen this. This is one of our most popular items at this point and has helped a lot of owners maintain a more reliable car!

My throwout bearing just went yesterday and ordered the fork and pivot ball today! :)

Qwimby1 07-07-2021 02:26 PM

Quote:

Originally Posted by VerusEric (Post 2670157)
We'll start looking into doing the pivot as well, should be a relatively inexpensive piece in quantity. The forks will be coming out first though of course.

Units are nearing the finish line!

Thanks,
Eric

I just noted the date on this thread. I ordered the fork and pivot

from 86speed yesterday. Looks like they just sold out. Do you have any others ready to go?

VerusEric 07-08-2021 04:20 PM

Quote:

Originally Posted by Qwimby1 (Post 3447274)
I just noted the date on this thread. I ordered the fork and pivot

from 86speed yesterday. Looks like they just sold out. Do you have any others ready to go?

We do our best to keep these on the shelf, ready to go. Yes, we have some ready to go.

mb_ 07-10-2021 03:19 AM

Quote:

Originally Posted by VerusEric (Post 3447594)
We do our best to keep these on the shelf, ready to go. Yes, we have some ready to go.

Ordered Tuesday night. Shipped Wednesday. Received by Thursday in Vancouver, BC. I'm glad I ordered directly from you guys!

chas3wba0 03-03-2022 09:36 PM

@VerusEric Any idea when these might be available again?

VerusEric 03-07-2022 08:35 PM

Quote:

Originally Posted by chas3wba0 (Post 3508536)
@VerusEric Any idea when these might be available again?

Very soon, we should have them in stock in about a week.

Mykii 04-02-2022 09:13 PM

Dang, these must be sellin out like hotcakes!

Looking to grab one too, but everywhere i've been looking has been out of stock!

VerusEric 05-22-2022 12:56 PM

Quote:

Originally Posted by Mykii (Post 3514661)
Dang, these must be sellin out like hotcakes!

Looking to grab one too, but everywhere i've been looking has been out of stock!

They'll be back in stock shortly (2-3 weeks). Yes, they are selling quite quickly.

Mykii 07-01-2022 12:41 PM

Peace of mind has been successfully installed. :D

VerusEric 07-09-2023 09:23 AM

These are always in stock for those asking! They solve a very serious issue and we are happy we were able to come up with the fix :).

We owe it all to you guys for asking us to design a fix multiple years ago! Thank you all.

spcmafia 07-13-2023 09:45 AM

Quote:

Originally Posted by VerusEric (Post 3586554)
These are always in stock for those asking! They solve a very serious issue and we are happy we were able to come up with the fix :).

We owe it all to you guys for asking us to design a fix multiple years ago! Thank you all.


On top of the many recommendations, have mine too. I went with both the fork and pivot and boy does it make a huge difference. 5 stars.


All times are GMT -4. The time now is 10:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.