Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels and Tires (https://www.ft86club.com/forums/forumdisplay.php?f=62)
-   -   FS: Mag Blue 57DR w/ RE11 (https://www.ft86club.com/forums/showthread.php?t=104858)

Ouhei 04-23-2016 03:45 PM

FS: Mag Blue 57DR w/ RE11
 
I traded my BRZ in for a STI and no longer have a need for these. 3 wheels have small curb rashes on them that could be covered up with touch up paint, the tires have around 12k miles on them and have a fair amount of tread left.

Specs:
- 18x9.5 +38 Magnesium Blue 57DR
- Black w/ red logo center caps
- 265/35/18 Bridgestone RE-11
- NO TPMS

Price:
$1,500 + shipping
I'm in Raleigh, NC and am willing to make a short drive to meet up for serious buyers.


Photos:
https://farm4.staticflickr.com/3712/...e6ab1e3c_b.jpghttps://farm4.staticflickr.com/3689/...a16daedc_b.jpg

Pictures off the car:
http://i.imgur.com/eORJxl3.jpg
http://i.imgur.com/gSOMo7n.jpg
http://i.imgur.com/W1QhmZ1.jpg

Close up of the rash:
http://i.imgur.com/NCYp8xt.jpg
http://i.imgur.com/q80wyot.jpg
http://i.imgur.com/0tI5vqC.jpg

Close up of tread:
http://i.imgur.com/2wy4tQw.jpg

Ripp91 04-23-2016 04:38 PM

Would you want to sell just the center caps ?

Ouhei 04-24-2016 09:02 AM

Quote:

Originally Posted by Ripp91 (Post 2631681)
Would you want to sell just the center caps ?

I'd prefer to sell them all together, but I'll let you know.

Ouhei 04-26-2016 11:59 AM

Bump

SG02WRX 04-27-2016 06:32 PM

Free Bump for you.

How did you like those tires. I'm in the market for a set and I was considering the RE-11

Thanks

Ouhei 04-28-2016 07:34 AM

Quote:

Originally Posted by SG02WRX (Post 2635775)
Free Bump for you.

How did you like those tires. I'm in the market for a set and I was considering the RE-11

Thanks

They're great tires. The grip is fantastic and they wear much better than I thought they would when I got them. They're a bit on the louder side on the road, but the trade-offs are worth the noise to me.

Bowen 04-28-2016 08:40 AM

These are gorgeous. Any fitment issues? What are you lowered on?

Ouhei 04-28-2016 08:53 AM

Quote:

Originally Posted by Bowen (Post 2636332)
These are gorgeous. Any fitment issues? What are you lowered on?

They're definitely one of my favorite wheels on the BRZ. I was lowered on ST Coilovers and had some light rubbing in the front from the fender tab. If you roll your fenders or even just bend that tab back (make sure you heat up the metal first if you're doing that) you should be fine at the height I was on. I wasn't using any camber adjustment and was using the factory alignment. If you used more camber you would have even more space.

NJ-JDM 04-28-2016 11:09 AM

Trying to imagine what these would look like on a WR blue car. Probably wouldn't look good at all. No close enough to be a monochrome look. They look awesome with white.

Ouhei 04-28-2016 11:12 AM

Quote:

Originally Posted by NJ-JDM (Post 2636409)
Trying to imagine what these would look like on a WR blue car. Probably wouldn't look good at all. No close enough to be a monochrome look. They look awesome with white.

I've seen it done a few times and it's not as bad as you may think. Unless the wheels get direct like they're a really deep navy to almost black so it looks pretty good, in full sun they get a bit brighter and it can look a little off. Definitely a color that works better on a neutral color car though.

nickmerronesucks 04-28-2016 12:05 PM

God I really wanna buy these and sell my SBC rpf1

MisterSheep 04-28-2016 12:20 PM

You didn't have any problems with running the 265 up front?

Ouhei 04-28-2016 12:21 PM

Quote:

Originally Posted by MisterSheep (Post 2636496)
You didn't have any problems with running the 265 up front?

I rubbed a bit on the tab that's on the front part of the wheel well. I bent that back and didn't have any issues after that.

MisterSheep 04-28-2016 12:28 PM

Quote:

Originally Posted by Ouhei (Post 2636499)
I rubbed a bit on the tab that's on the front part of the wheel well. I bent that back and didn't have any issues after that.

Thanks I looked through your thread and saw you had already answered this.. Anyways beautiful wheels and GLWS!


All times are GMT -4. The time now is 02:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.