Window seals
 

First of all.. there are so many topics it would be hard to search them all... so,

You know how the windows roll down and up when you open and close the doors.. does anyone have the same thing as me?

On my driver side when the window rolls back up it catches the seal and pulls it up.

Would this be a warranty fix possibly?

I believe so. If your in warranty just take it in.

Right on. Thanks for the feedback

Sent from my SAMSUNG-SM-N910A using Tapatalk

Depending on how severe it is, the window seal may just be dried out and need some silicone love.

Well, now, there ya got it @nanofamous....... both solutions in 2 posts .......:thumbsup:

I think we may have a record here ........ :thumbup:


humfrz

It has been doing it for a bit now.. you can definitely see where it catches

Sent from my SAMSUNG-SM-N910A using Tapatalk

if you search 'window seals' you'll get what you're looking for. Here are a couple:

http://www.ft86club.com/forums/showthread.php?t=11682

http://www.ft86club.com/forums/showthread.php?t=68731

Thanks for the heads up @shiumai

Almost every problem with the 13's have been addressed. "Take it to the shop" is the best answer.

Mine was smooshed up on the driver side (a friend of mine couldn't stop giggling when I described the issue this way) and it was fixed at the dealership under warranty. Take it in, show them the issue, and they should fix it.

I've taken mine to the Subaru shop 2-3 years back under warranty and the problem did not go away.

The best solution is to lightly rub some 303 Aerospace Protectant on the seals or a type of silicone based gel. It is not a perm fix, but it will have to do as the dealer will only replace the same exact part on there... The problem will come back.

If you think there is an issue, tell the dealer. At least make sure they note your complaint.

Did you have the door switches replaced? The main problem is the early switches dropped the windows 20mm. A few months into production they cut the index in half. That cured it.

I don't believe they replaced my switches... =/

All I saw on the warranty invoice was the replacement of the seal + labour. :iono: