Bowen's SWP BRZ Build
 

2014 SWP BRZ Limited 6MT

My intentions for this car changed as my ownership progressed. I went through three different exhausts, two different sets of wheels, and other various accessories that shouldn't have been on the car in the first place.

I had a good time buying cheap/used parts that would either not fit my tastes, or just look silly. So from now on I only buy quality parts, support manufactures, and never cheap out.

Autocross has been a recent discovery of mine, and even though I'm crazy slow, I love every second I'm on the course. I'll most likely be perusing this as a hobby, and will continue building the BRZ as an autocross capable machine.

Exterior:
Perrin 2' Antenna
OEM 2017 Tail Lights
STI front Lip
Rally Armor
JDM Side Markers
20% Window Tint
*TOMS Tail Lights* Broken

Interior:
GT86 Arm Rest
STI Push to Start


Engine/Performance
Open Flash Tablet running Stage 2 93 Octane
Tomei UEL Header
Perrin 2.5 Resonated Catback
Perrin Inlet Tube
Perrin Drop in Filter
Perrin Foam Cylinder Cover
Perrin Oil Filter Cover
Fumoto Valve
Hood Struts
*Perrin Cold Air Intake* SOLD
*FT86SpeedFactory V2 Exhaust* SOLD
*GReddy Evo III* SOLD


Wheels/Tires/Suspension/Brakes
Hawk IPS Pads
Motul Brake Fluid
Motul Gear Fluid

ST Suspension Coilovers w/ Stock Top Hats
Camber - 1.5F - 2.5R

SUMMER/AUTOCROSS SETUP-
17x9 Weds TC105N TS Titan
255/40/17 Bridgestone Potenza RE-71R

DAILY SETUP-
17x9 Rays Gramlights 57CR Gunmetal
245/40/17 DWS06


The day I picked her up - stock

http://i.imgur.com/B03oxGD.jpg

Daily/Winter Mode-

https://i.imgur.com/HZLey9R.jpg

https://i.imgur.com/XLvfJso.jpg

https://i.imgur.com/WYIM9na.jpg

Summer/AutoX Mode-

http://i.imgur.com/YKJaUyD.jpg

http://i.imgur.com/MlPDHCo.jpg

AutoX Shots-

https://i.imgur.com/dbWzgqb.jpg

https://i.imgur.com/CiDl5v2.jpg

https://i.imgur.com/5lQs32q.jpg

Stay single exit for that weight reduction ;)

Stayed stock for a little while, started to add some basic mods like tint and exhaust.

https://uploads.tapatalk-cdn.com/201...efb6cfe489.jpg

Red STi button

https://uploads.tapatalk-cdn.com/201...db38fd45b2.jpg

Here's a few more pics of the exhaust. It sits fairly low, but haven't scratched it yet.

http://uploads.tapatalk-cdn.com/2016...4f51a6dd7c.jpg

http://uploads.tapatalk-cdn.com/2016...ea6996f1ea.jpg

Sent from my Nexus 6P using Tapatalk

Keep it going:clap:

Just picked up a used Perrin CAI and Perrin Inlet tube. Bought off someone on the forum, he packed it so poorly, I'm surprised nothing was damaged. Will be posting pics later.

Here's a pic of the box my CAI and Inket tube came in....
http://uploads.tapatalk-cdn.com/2016...65012d5604.jpg

Thankfully, everything was there. Except the hardware.

http://uploads.tapatalk-cdn.com/2016...04c6186fbd.jpg

I don't know if the seller forgot to include it, or it fell out on it's way from CA to MD.

Anyways, I got around to installing them today, and here's some pics of the install. http://uploads.tapatalk-cdn.com/2016...2f84fbffda.jpghttp://uploads.tapatalk-cdn.com/2016...a99a9aaa05.jpghttp://uploads.tapatalk-cdn.com/2016...6c6db2a9f2.jpghttp://uploads.tapatalk-cdn.com/2016...53ea202bcb.jpghttp://uploads.tapatalk-cdn.com/2016...5581cdc210.jpg

The install wasn't too hard, but I'd hate to have to take off that bumper ever again. Regardless, throttle response has improved (or so I think it has). And it frees up A LOT of engine room. You'll be able to get a good look at some shiny headers when they get installed :cool:

Sent from my Nexus 6P using Tapatalk

Quick tease of some upcoming additions :cool:

http://uploads.tapatalk-cdn.com/2016...1727f09a20.jpghttp://uploads.tapatalk-cdn.com/2016...773c418ccf.jpg

Sent from my Nexus 6P using Tapatalk

ST coilovers, rally armor, and some Mutek lugs are one the way.

Rally armour, lug nuts, and coilovers are in. So much closer to getting those gram lights mounted :D

http://uploads.tapatalk-cdn.com/2016...21d4a02080.jpghttp://uploads.tapatalk-cdn.com/2016...2bb002997d.jpg

Sent from my Nexus 6P using Tapatalk

Just got done installing my ST coilovers and GramLights.

Here are some pics I took along the way as well as the final product!

http://uploads.tapatalk-cdn.com/2016...3152216e06.jpghttp://uploads.tapatalk-cdn.com/2016...a5b881908c.jpghttp://uploads.tapatalk-cdn.com/2016...7294d8101f.jpghttp://uploads.tapatalk-cdn.com/2016...c0b216efae.jpghttp://uploads.tapatalk-cdn.com/2016...c22982206f.jpghttp://uploads.tapatalk-cdn.com/2016...16c458b3fd.jpghttp://uploads.tapatalk-cdn.com/2016...b49459dfc4.jpghttp://uploads.tapatalk-cdn.com/2016...40da99bff1.jpghttp://uploads.tapatalk-cdn.com/2016...3dbbc01be3.jpg

I'm still debating on whether to install my rally armour kit. I'll wait until after I get my allingment done and decide then.

Sent from my Nexus 6P using Tapatalk

I would do it man. The flaps look awesome.

Yea I probably will since the tires paste loose grass onto the cars body haha. The pictures above make it seem like I drove off road.

Sent from my Nexus 6P using Tapatalk

Dropped the BRZ off to get an alignment, camber specs were -.95 FL, +.90 FR, and -2.0 for the rears.

Front right is a whole 2.0 degrees higher, need the adjustable crash bolts to bring the strut into place. Tech says that the coil is installed correctly, it's just the left and right are not drilled the same.

What a shame :(