Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   BRZ headlight shroud inside FRS headlight? (https://www.ft86club.com/forums/showthread.php?t=103816)

S84kam 04-01-2016 02:28 PM
BRZ headlight shroud inside FRS headlight?
 
Can someone tell me if this will fit inside the FRS's headlights? As in, opening up my FRS and just throwing these bad boys in? I'm very interested in doing a boomerang mod to my FRS

http://i.imgur.com/U3b7rDh.jpg?1

lbroskee 04-01-2016 03:53 PM
Quote:
Originally Posted by S84kam (Post 2606853)
Can someone tell me if this will fit inside the FRS's headlights? As in, opening up my FRS and just throwing these bad boys in? I'm very interested in doing a boomerang mod to my FRS

http://i.imgur.com/U3b7rDh.jpg?1
They lights are interchangeable so don't see y not

S84kam 04-01-2016 03:59 PM
Im going to add another question... but first, theres plenty of broken Ebay BRZ headlights (mainly the front clear plastic piece) Would i be able to use my FRS's front clear plastic piece and throw it over a broken BRZ?

8R6 04-01-2016 04:44 PM
Quote:
Originally Posted by S84kam (Post 2607016)
Im going to add another question... but first, theres plenty of broken Ebay BRZ headlights (mainly the front clear plastic piece) Would i be able to use my FRS's front clear plastic piece and throw it over a broken BRZ?
probably not. the frs headlights are a tiny bit longer than the brz (at the pointy part towards center of car).

shiumai 04-01-2016 05:36 PM
OP, if no one else knows for sure, please be the first to take the plunge and attempt this for the benefit of our community...and make sure you document it well with a DIY. thank you in advance.:D

go_a_way1 04-01-2016 05:37 PM
My $0.02 is on this not going very well.

mrderp 04-01-2016 05:40 PM
The FR-S headlight is not really longer at the center than the BRZ one.

From Perrin
Quote:
The BRZ light is missing that “sharp” corner where the headlight meets the bumper, or is it….. In the picture below, you can see with the bumper removed that there is a plastic piece covering up this corner. Removing this small piece makes both the FR-S and BRZ headlight the exact same shape! This also means, customers can do some swapping out of headlights!
http://blogperrinperformance.com/wp-...sheadlight.jpg
http://blogperrinperformance.com/wp-...headlights.jpg

NyC Zn6 04-01-2016 07:18 PM
Wouldn't it be easier to just swap BRZ headlights....the full assembly?

8R6 04-01-2016 07:43 PM
Quote:
Originally Posted by mrderp (Post 2607154)
well damn. i didnt know it was just a plastic "cover" over the housing. the more you know

FRSBRZGT86FAN 04-02-2016 01:24 AM
Quote:
Originally Posted by 8R6 (Post 2607370)
well damn. i didnt know it was just a plastic "cover" over the housing. the more you know
It's the same reason why winjets etc. Fit both cars


All times are GMT -4. The time now is 02:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.