Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Member's Car Journals (https://www.ft86club.com/forums/forumdisplay.php?f=40)

- - 2015 CWest BRZ FBM GT2871R (https://www.ft86club.com/forums/showthread.php?t=103676)

Nardo Grey Varis Widebody

I've been a lurker but haven't posted my build. As it stands today, it looks like this. It's been a little over a year since I've owned this car (2015 Feb) and it has somewhat transformed.

May 2017
http://i4.photobucket.com/albums/y13...psil35yvzv.jpg

Dyno'd it again 11/11/16
http://i4.photobucket.com/albums/y13...ps5foxvlqn.jpg

11/03/16 got it Dyno'd
http://l.facebook.com/l.php?u=http%3...pg&h=zAQHAfTKx

Update 10/10/16 Still trying to figure out the Delicious Flash and Go Tune
http://i4.photobucket.com/albums/y13...psrjs3c3gh.jpg

Update 6//8/16
http://i4.photobucket.com/albums/y13...psdkfroluh.jpg

4/14/16
http://i4.photobucket.com/albums/y13...ps86qlnfkv.jpg

Wheels/Suspension
KWV3
Vorshlag Camber Plates
Carbing Titanium Front Strut Bar with MCB Brace
Carbing Rear Strut Bar
SPC Rear LCA
KICS R40 Black Iconix Lug Nuts
AP Racing Sprint BBK w/ DS2500 pads
Stoptech Stainless Steel Brake Lines
ARP wheel studs
Whiteline Positive Traction Kit KDT922
Whiteline Support Outrigger Insert KDT925
Whiteline Transmission Mount Bushing Insert KDT926
Whiteline 22mm Front sway bar
Whiteline Front Endlinks
MCA Traction Mod
Track wheel: Volk TE37RT 18x10J +44 w/ Nitto NT01 245/40 18 SOLD
Autox/daily wheel: Wedsport TC105N 17x9 +38 w/ BF Goodrich Rival 255/40 17 SOLD
H&R 20mm Spacers F&R if I use stock wheels/tires

Engine
Tomei 60mm Front Pipe SOLD
JDL 3 inch resonated Frontpipe + Overpipe
Cusco Engine Mounts
Greddy 10 Row Oil Cooler
Radium Engineering dual oil catch can kit
Koyo Aluminum Radiator
Samco Radiator Hose kit
Carolina Dyno shroud and SPAL fan
Ecutek
Moto-East Flex Fuel Kit
Fullblown Motorsports Base Kit GT2871R
FIC 1100cc injectors
Grimmspeed EBC
DW300 Fuel Pump
DEI Reflect a Gold and Titanium Exhaust Wrap
DEI Titanium Turbo Blanket
ACT XT Street Clutch
Tommy Kaira 01S Heat Blue Titan Titanium Exhaust cat back
Raceseng Cam Plate
Boomba Racing Check Valve
Rize Japan Titanium hood prop

Interior
Beat Sonic Phone Holder
TRD Shift Knob
Beastronix 86 Nanny PD+ABS
Craven Flex Pod
Defi Advance Control Unit
Defi Advance CR 52mm: Water Temp, Oil Temp, Oil Pressure, Boost
Block8head dual vent pod
PLX DM6 Wideband
Recaro SPG
Recaro Aluminum sidemount
LMR Auto Power 4 Point

Exterior
Tom's USDM LED Tail Lights SOLD
TRD Dry Carbon Fender Aero Fin SOLD
Cleib Original Carbon Fiber Canard cut to fit DRL
C West Carbon Side Skirts SOLD
C West Carbon Rear Half Splitter moulded to rear bumper. SOLD
CARBing Front and Rear Tow Hooks
J Blood Rain Guards SOLD
S Craft Carbon Fiber Lip SOLD
TRD Trunk Lip Spoiler
Move Over Racing Bumper Quick Release 2 pairs, Front and Rear
TRD Trunk Stabilizing Aero Cover

Awaiting Install
Varis hood System 2, F&R bumper, Trunk
Varis Widebody
Crystal Eye Taillights
Aimgain X Stancenation trunk spoiler
Modellista engine cover
Schroth 6 point harness
Top Secret Aerocatch
Westcoast Fastners Ti products
Volk Burning Red TE37RT 18x10.5 +11 5x114

I bought this brand new in February of 2015 and the first mod I purchased within a few days of having this car were Tom's. Stock tails were ugly and couldn't stand the rices-ness of them.

http://i4.photobucket.com/albums/y13...psft5zxcwo.jpg

Started hating the stock wheels so I started to save up for a nice coilover kit and wheel set up. Here it is in stock form.

http://i4.photobucket.com/albums/y13...psmrtg3wji.jpg

Picked this up in April last year (2015) kwv3.

http://i4.photobucket.com/albums/y13...spgqvxzyx.jpeg

Then in May I picked up these flat black SSR GTV02 18x9.5J +40 and came with SSR Forged Nuts.

http://i4.photobucket.com/albums/y13...siy14d579.jpeg

Then in June 2015 I picked up some Vorshlag Camber Plates.

http://i4.photobucket.com/albums/y13...swo8gnfb7.jpeg

Along with a cam plate that I haven't even installed to this day. (Bought in June 2015)

http://i4.photobucket.com/albums/y13...sdnosf8ra.jpeg

Also bought these in June 2015, TRD fender aero and Cleib canard.

http://i4.photobucket.com/albums/y13...sda5gxtvl.jpeg

http://i4.photobucket.com/albums/y13...svrnmc6pg.jpeg

This looks great man.

Installed my TRD fender aero June 2015

http://i4.photobucket.com/albums/y13...svvnj0cag.jpeg

Install day with @Clint_1111 in June 2015 a few days after TRD fender install.

http://i4.photobucket.com/albums/y13...sua0lmnsn.jpeg

Looked like this after it was all said and done. June 2015.

http://i4.photobucket.com/albums/y13...sjso9coix.jpeg

Got my Cleib canards installed for 8/6 day meet. Also got my wheels mounted.

http://i4.photobucket.com/albums/y13...psjauemzxt.jpg

Photo Credits go to Bill.

You hated the stock tails because of rice then stuck a heap of "fast and furious" plastic bits on? Interesting. :P

Quote:

Originally Posted by softgrip (Post 2615904)

You hated the stock tails because of rice then stuck a heap of "fast and furious" plastic bits on? Interesting. :P

Lol yeah. But you really like the chrome tails?

Installed a Wasp Composites 5 inch Splitter in August 2015.
http://i4.photobucket.com/albums/y13...psnvliikfn.jpg

Installed a carbon c west kit (side skirts and rear half spoiler). Also modified the Cleib canard to fit with the DRL. Circa 2015 Nov.

http://i4.photobucket.com/albums/y13...ps9ddrxea0.jpg

After multiple times to the body shop for getting the paintmatch correct, I finally feel satisfied. It's probably going to be the best it's going to be right now without spraying half the car to blend it in. But I just installed a TRD spoiler, J Blood carbon Rain Guards, S Craft carbon lip, Carbing rear tow hook.

http://i4.photobucket.com/albums/y13...pspywjrbil.jpg

http://i4.photobucket.com/albums/y13...ps86qlnfkv.jpg

http://i4.photobucket.com/albums/y13...pslahhqagt.jpg

http://i4.photobucket.com/albums/y13...pspc4e4t5w.jpg

http://i4.photobucket.com/albums/y13...psoamioenz.jpg

Lost a clear side marker today. Hate the clips. Force upgrade to either Toyota JDM clears or valenti clears.

http://i4.photobucket.com/albums/y13...psucw4ej0j.jpg

Got a few updates from last month to now.

http://i4.photobucket.com/albums/y13...psgro6fpvg.jpg

Had Creative Auto Lab from Clovis, CA mould the Cwest rear to the bumper. Looks a whole lot nicer now. Finished it just in time for the Fresno Area Subaru Trust aka F.A.S.T. Little Big Meet.

http://i4.photobucket.com/albums/y13...pssrwpy7iw.jpg

Photo by John of Convex Photography at LBM. I won first place at the car show! Did know I was gonna even win LOL. It was by the people's vote too.

http://i4.photobucket.com/albums/y13...psmw38xfhc.jpg

Went to Morro Bay to snap some photos.

http://i4.photobucket.com/albums/y13...psg8xfrmos.jpg

http://i4.photobucket.com/albums/y13...pseaablly6.jpg

On the way back home from Santa Barbara 2 weeks ago I destroyed my Wasp Composites splitter. Totally my fault and considered an installation error. I should have bought about it when k installed the SCraft lip. Maxing out the splitter rods to the last few threads was stupid on my part and I should have known better that a piece of aero would need more than a few threads to hold especially at higher speeds. The air pressure in my engine bay also caused the side markers to pop off too. That or side markers just suck.

http://i4.photobucket.com/albums/y13...psgpz64ply.jpg

http://i4.photobucket.com/albums/y13...psjndgkme4.jpg

Finally installed my rear stainless lines for Lone Pine Time Trials that I did last week. Pretty much a high speed autox w/ up to triple digit speeds.

http://i4.photobucket.com/albums/y13...psgfgatt9x.jpg

http://i4.photobucket.com/albums/y13...psrtzco6bz.jpg

Destroyed my Bridgestone S04 265/35 18 at Lone Pine Time Trials. I got a good 11k miles out of them with autox and canyon driving out of them.

Replaced it with Nitto NT01 245/40.

http://i4.photobucket.com/albums/y13...ps1dmmi0jb.jpg

http://i4.photobucket.com/albums/y13...psi2rlbwyo.jpg

Looks pretty meaty

Picked up new wheels to daily/autox/track (LOL I don't daily this car though). Didn't want to roll around on NT01s

Wedsport 17x9 TC105N on 255/40 Rivals

http://i4.photobucket.com/albums/y13...psdkfroluh.jpg

http://i4.photobucket.com/albums/y13...psxaak1oqa.jpg

This past weekend I did 2 days at Buttonwillow

http://i4.photobucket.com/albums/y13...ps5b00ian7.jpg

http://i4.photobucket.com/albums/y13...psr8siiubx.jpg

http://i4.photobucket.com/albums/y13...psxemrn6ff.jpg

Ran stock tire since I am new. I'd rather lose traction at low speed than at a higher speed with stickier tire.

May 27th I also installed my Greddy Oil Cooler which I totally fucked up by not tightening the sandwich plate all the way. I bukake'd my engine bay with oil on a test drive for leaks. That was a pain to clean too.

http://i4.photobucket.com/albums/y13...ps6bf05fx5.jpg

I like the fact that you're doing most of the changes yourself to the car. Nothing like learning as you go. Seems like it's becoming expensive in your end though. Haha

Installed my Radium dual catch can kit today.

http://i4.photobucket.com/albums/y13...pswtxuktgd.jpg

Installed my whiteline rear crossmember bushings earlier tonight. Will see how it is tomorrow at autox!

Quote:

Originally Posted by Ry.ruzn (Post 2682723)

I like the fact that you're doing most of the changes yourself to the car. Nothing like learning as you go. Seems like it's becoming expensive in your end though. Haha

HAHA yeah really expensive. Just bought more stuff and updated the section for awaiting install in the OP.

Took the car to Streets of Willow in CCW configuration earlier this month.

[ame="https://www.youtube.com/watch?v=07zh9MXiG5w"]https://www.youtube.com/watch?v=07zh9MXiG5w[/ame]

here's some photos.

http://i4.photobucket.com/albums/y13...psta1almjo.jpg

http://i4.photobucket.com/albums/y13...ps8livlohz.jpg

http://i4.photobucket.com/albums/y13...psugrdjgkx.jpg

Then this past weekend went to Bass Lake with my @clint_111 to take our dogs to the lake.

http://i4.photobucket.com/albums/y13...pswihrhcrm.jpg

http://i4.photobucket.com/albums/y13...psbkny69jv.jpg

http://i4.photobucket.com/albums/y13...psqedlnhmt.jpg

Dyno'd it again. 1 BAR 380whp and 270 ft lbs of torque on a dynojet. I also did 280whp at wastegate boost 0.5 BAR

http://i4.photobucket.com/albums/y13...ps5foxvlqn.jpg

SCCA Performance Driving School 3/18/17

http://i4.photobucket.com/albums/y13...pstnayv5zo.jpg

how hard was it to DIY the steel braided brake line?

Quote:

Originally Posted by dattran86 (Post 2877120)

how hard was it to DIY the steel braided brake line?

The hardest part was bleeding. Just make sure you have towels and brake cleaner to absorb the fluid when you remove the stockers.

Nice work man! Car looks awesome!

Where did you get the Carbon fiber cwest parts from?

Quote:

Originally Posted by BrzVision (Post 3392096)

Where did you get the Carbon fiber cwest parts from?

from cwest japan