Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   AFRICA (https://www.ft86club.com/forums/forumdisplay.php?f=77)
-   -   Boot Liner (https://www.ft86club.com/forums/showthread.php?t=103301)

AT-86 03-22-2016 11:49 AM
Boot Liner
 
I fitted one of these the other day.

http://www.afriboot.co.za/wp-content...04/GT-86-3.jpg

It works so much better then having the full size wheel make everything that you put in the boot, smell like tire.

I picked it up from them at their warehouse. It's between the Rooiwal Power Station and Soshanguve, so it makes quite a nice drive for someone in a newly acquired 86 :burnrubber:
http://www.afriboot.co.za/product/to...pe-tpe-liners/

ps...their price is VERY negotiable.

Summerwolf 03-22-2016 12:11 PM
You guys don't get the trunk floor carpet over there!?!?

86 South Africa 03-22-2016 03:12 PM
Quote:
Originally Posted by Summerwolf (Post 2592141)
You guys don't get the trunk floor carpet over there!?!?
We do... Except we also get a full size spare wheel which pokes out the top!

Summerwolf 03-22-2016 03:17 PM
Interesting.

AT-86 03-22-2016 05:17 PM
Ours are like this out of the Factory.

http://www.carmag.co.za/carmag/wp-co...012/12/071.jpg

86 South Africa 03-23-2016 03:14 AM
I just wanted to know... does this boot liner fit snugly?
I'm keen for 1, but it looks like the fit is a little out (looks a touch too big)?

How negotiable are they? Web says R1200.

AT-86 03-23-2016 04:11 AM
It fits very snugly.

It loose where it's hanging over the gaping hole of the mag wheel. I bought some pressed wood, that I want to cut in a circle to fit on the inside lip of the mag wheel. That would give it the support it needs.

Wonder Bra for my Boot Liner :D

sav 03-30-2016 01:36 AM
Here's mine:
http://img.photobucket.com/albums/v1...6/photo-54.jpg

AT-86 03-30-2016 02:36 AM
Marie Biscuit or tyre inflation kit?

nzer 03-30-2016 05:42 AM
Here's the genuine Toyota "donut" liner that the 2012/13 cars with full-sized spare came with in Australia and New Zealand
http://www.ebay.com.au/itm/Toyota-86...-/252056748850

nzer 03-30-2016 05:44 AM
Quote:
Originally Posted by AT-86 (Post 2593479)
It fits very snugly.

It loose where it's hanging over the gaping hole of the mag wheel. I bought some pressed wood, that I want to cut in a circle to fit on the inside lip of the mag wheel. That would give it the support it needs.

Wonder Bra for my Boot Liner :D
I used a large block of polystyrene cut to size to fit inside the wheel, under the "donut' cargo liner. Means you don't scratch the inside of your wheel as you might if you use wood.

riri86 03-30-2016 02:52 PM
Quote:
Originally Posted by sav (Post 2602768)
I did the same, look for a biscuit from a smashed Polo Vivo. Makes life so much more easier :D

Probably the greatest mod you can do in South Africa

sav 03-31-2016 01:03 AM
Quote:
Originally Posted by AT-86 (Post 2602806)
Marie Biscuit or tyre inflation kit?
Marie biscuit from an Impreza. Just make sure it clears the front calipers and if you do have a flat, the spare always goes on the front because of the limited slip diff.

It's a decent weight saving as well. :D

momoPike 03-31-2016 06:27 PM
Quote:
Originally Posted by sav (Post 2604473)
Marie biscuit from an Impreza. Just make sure it clears the front calipers and if you do have a flat, the spare always goes on the front because of the limited slip diff.

It's a decent weight saving as well. :D
What is a Maria biscuit :o
Smaller tyre then stock? Size?


All times are GMT -4. The time now is 05:21 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.