Exhaust bolt/nut size
 

I'm replacing my single-exit Berk track pipe with a Nameless axleback this weekend. I tried to do it the other day, but the nut was too stripped/rusted and will need to be cut off.

Does anyone know what the size is for the nut and bolt on the axleback, so I can pick up new hardware before this weekend?

it's been a while since I changed mine. for some reason 14mm and 12mm are coming to mind but I might be way off. sorry I'm no definite help.

The stock hardware is 14mm bolts. You can use any thread pitch of your choosing

Awesome! Thank you very much.

:burnrubber: