Which Exhaust for TRD JP rear bumper
 

Hello all,

I am trying to plan out my new exhaust set-up and I am looking for a quad catback for the TRD japan rear bumper with a overall goal of a nice deep setup that isn't raspy nor will upset my neighbors with a cold start.. I am currently running a resonated frontpipe/overpipe combo with a j2 dual catback. It's okay on the loudness but will definitely need to be changed once I go to a JDL UEL catless header. I was considering the Blitz quad tip but it's too loud and too expensive for the set-up I am trying to achieve. Currently I'm thinking about either going for a Perrin 2.5 resonated catback (will have to have quad tips custom made) or the TRD JP quad exhaust (axelback).
I know that the Perrin 2.5 Resonated exhaust is considered to be one of the more quieter exhausts like the Invidia q300 and it sounds nice when paired with a JDL UEL header and a JDL "ultra quiet" front pipe. My concern is that there isn't many exhaust videos that use that header/front-pipe setup with the TRD exhaust. Thus making it hard for me to choose which one in order to pick.

TL/DR looking for a quad catback that isn't loud that fits the TRD Japan rear bumper

What exactly do you mean by the Blitz exhaust being too loud? And what exactly is your budget?

-alex

Someone has said the Blitz Quad exhaust is similar in sound to the Invidia N1 exhaust, which is too loud for what I am trying to achieve. For budget... I will consider the price and see if it's worth me to pay it, if that makes any sense.. Like I might consider the $1.9k price tag of the blitz if it wasn't so loud, but I do think it's a gorgeous exhaust.

Blitz Japan sound clip:

[ame="https://www.youtube.com/watch?v=tYCfBZRMZW8"]BLITZ / NUR-SPEC C-Ti Quad with Diffuser ZC6 BRZ EXHAUST SOUND - YouTube[/ame]

Any exhaust just get custom tips


Sent from my iPhone using Tapatalk

Does anyone know if the trd rear bumper outlets are wider or pshed closer out to the edges than the cutouts? I have a feiend that had the cutouts and had a custom quad added to his q300.. but i also found a picture of a perrin resonted exhaust in the trd bumper and it didnt look centered in the holes... i will post a picture tomorrow morning when i get to a computer

Ive listened to that.

https://youtu.be/cR_I0pAk7Dc

https://youtu.be/k8-kD8k3Ycg

Heres 2 more

Your buddy with the custom quad Q300, did he have to cut the tips off or were they removable? Sorry to jack the thread, but I am looking to do this same setup.

Cut them

I was afraid of that. Oh well.

Updated;

Here is the perrin 2.5 resonated with 4in tips. Do you see what I mean by it doesn't look centered in the exhaust ports?
http://www.ft86club.com/forums/attac...1&d=1458142205


The next picture is my friends car with the TRD muffler garnishes and the custom quad tips added on to his q300. It looks more centered than the perrin even though the exits on both of the exhausts are perfect with the stock normal bumper
http://www.ft86club.com/forums/attac...1&d=1458142205

and last but not least, he used these exhaust tips and had them welded on straight to the q300
http://www.ft86club.com/forums/attac...1&d=1458142205

Both of those are with front pipes that basically make the car much louder.

If that's what you are running, you are left with trying to figure out what is "not loud" by your standards.

My recommendation is for you to reconsider the exhaust choice if you are running a front pipe that is without a resonator.

-alex

THose are two different bumpers. One is the complete TRD bumper, the other only has garnishes...

I'd be willing to bet that on the TRD bumper, the exhaust cut outs are closer to the sides.