Noticed a few CEL's turned off in my tune. Cause for conern?
 

http://s10.postimg.org/xwfpm2tud/2016_03_12.jpg

Should these being turned off be a cause for concern?

Just snooping around in my Open flash tune.

Edit:

God damnit stupid image uploader.

Codes are P0103, P0068, P2096

Is this 02 code turned off due to not throwing a Cat code on a catless car?

Do you have a larger photo?

yes sorry..finally figured it out..I just dont understand why the system to lean is turned off, but too rich is still on. P0420 is turned off but i understand that is so i don't throw the code for being catless.

Hmm... You're on the SBD turbo?

The MAF/MAP codes might be turned off for that, since those readings will be pretty high, but I'm not sure about P2096.

Yes unfortunately I am. And I was having a map sensor code and reported it to shiv(it only came on after reflashing with the second tune he sent me). And He sent me this tune and now the light doesn't come on but i see this is why, no big deal i suppose. just the lean one kinda skeevs me out.

Well, it's the catalyst being too lean, which isn't the end of the world. That's usually the code that people get from running a spark plug defouler in the rear O2.

Oh okay usually I would see P0420/430 depending on the car(catless or with spaced out rear plug).

well thanks for the help, i was just trying to figure out how to raise my launch control and started clicking stuff. lol

P0420 is the code disabled for no cat (cat efficiency)


I suspect those codes are all to do with having the turbo where you will get unusual conditions compared to stock non turbo car hence they will trip if not disabled


if you ever want to look up those codes google code and Subaru eg "P0420 Subaru" as its a Subaru ecu as some codes are manufacturer specific.