Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Member's Car Journals (https://www.ft86club.com/forums/forumdisplay.php?f=40)
-   -   Slammed to... Slightly more functional (https://www.ft86club.com/forums/showthread.php?t=102532)

Cole 03-06-2016 10:31 PM

Slammed to... Slightly more functional
 
With a brief backstory:

I had been loosely following the car's development for a few years before it was released, with the intention of purchasing one as soon as I could. Being that I was 20 or 21 when it came out, without a stable job, it was a dream and couldn't happen. I ended up getting a well paying job, with some much needed stability and since my 2001 Mazda 626 (I had a 5 speed V6, apparently those are pretty rare) was starting to show signs of it's age, and me not having a ton of faith in it, I knew I had to start shopping around.

Originally, I was going to purchase a tC, so I test drove a few of them, but could only find autos. I wasn't happy with the auto transmission, so I went to the dealership to drive a new one with a manual. After talking with the salesman, I mentioned how I had driven a tC before, but I really wanted the FRS, despite it's impracticality. He ended up tossing me the keys to an FRS and I drove it. While I really, really liked the manual trans in it, it just wasn't a good fit for my life at that point. So I asked about the AT, he mentioned it was really good, so I threw caution to the wind, put a deposit down that same day and ended up with a 2015 Halo FRS a few days later.

Here it is in it's multiple stages

The day after I brought it home
https://farm8.staticflickr.com/7518/...19f840bd_b.jpg

New exhaust (N1 clone) and Buddy Club tails (really regret selling these)
https://farm8.staticflickr.com/7582/...47112da6_b.jpg

Coils (GodSpeed MonoMax RS) installed
https://farm8.staticflickr.com/7356/...2241c264_b.jpg

Chillin' at the cottage
https://farm9.staticflickr.com/8872/...074e717e_b.jpg

Black stuff ready to go in
https://farm9.staticflickr.com/8586/...01d2ff09_b.jpg

https://farm9.staticflickr.com/8715/...dd1b4fc6_b.jpg

First set of wheels (Enkei Compe 16x8 with 225/50 RE11A) This is @drewbot favourite stage of the car, and he never lets me forget that. But to be totally honest, it was really perfect in this configuration, and I wish I never sold these wheels, or the tails.
https://farm8.staticflickr.com/7618/...fa30ef17_b.jpg
https://farm9.staticflickr.com/8679/...98e608a6_b.jpg

Hi ISF
https://farm8.staticflickr.com/7653/...859f924a_b.jpg

This thing was too fucking loud
https://farm9.staticflickr.com/8718/...afe680de_z.jpg
https://farm8.staticflickr.com/7586/...94aec568_z.jpg

Posted up with the new wheels (XXR 527 17x8.25 +25)
https://farm9.staticflickr.com/8786/...0d031a0e_b.jpg
https://farm8.staticflickr.com/7721/...63b3e04e_b.jpg

More poor life choices
https://farm9.staticflickr.com/8759/...0c18f55a_b.jpg
https://farm6.staticflickr.com/5468/...54c412e5_b.jpg

And then suddenly, I said screw it to living the low life and decided I wanted to start going fast (well, as fast as you can go with a header and a stg 2 91 tune)

To Be Continued

Cole 03-06-2016 10:31 PM

So now this brings us to current day. I don't have a whole lot planned for it now very happy with where it's at, and I want to get some autox under my belt before I start changing anything. Though, if I know myself, I'll probably have another 6 exhausts through this next year.

As of right now, my parts list:

Engine
-HKS air filter
-Corsa exhaust

Suspension
-Tein S-Tech springs
-Camber bolts
-SilverProject top hats
-SPC LCA
-SPC Toe Arms

Wheels
-17x9 720Form GTF1
-245/40 RE71R

Exterior
-CDC Mustang 3rd brake light

https://farm6.staticflickr.com/5771/...3f884b0f_b.jpg
https://farm2.staticflickr.com/1669/...9cec5916_b.jpg

Winter time is best time for these cars
https://farm2.staticflickr.com/1699/...aaa470c9_b.jpg

https://farm2.staticflickr.com/1550/...a841883f_b.jpg
https://farm2.staticflickr.com/1614/...bf9561e8_b.jpg
https://farm2.staticflickr.com/1613/...b279a9d8_b.jpg
https://farm2.staticflickr.com/1670/...73c12884_b.jpg

rookie 03-06-2016 11:40 PM

I currently have the Enkei Compes too and contemplating getting rid of them. I feel like I might regret it too. I'm waiting to see how they look with a drop first.

Can't wait to see what else you have planned.

drewbot 03-07-2016 03:08 AM

And you didn't even mention how many actual exhausts you have

Cole 03-07-2016 08:36 AM

Quote:

Originally Posted by drewbot (Post 2571489)
And you didn't even mention how many actual exhausts you have

I think at this point, everyone just knows

Tcoat 03-07-2016 08:48 AM

Quote:

Originally Posted by drewbot (Post 2571489)
And you didn't even mention how many actual exhausts you have

That one is easy. How many types are there?

DailyDriver86 03-08-2016 11:56 PM

Quote:

Originally Posted by Cole (Post 2571293)

i absolutely love these fat/tall tires! what tires were they and what were you dropped on at this time? And do you have more pictures!?

one more thing - I'm thinking about using Tein S tech's with 225 50 17

jawn 03-08-2016 11:58 PM

So the 720Forms fit!

Cole 03-09-2016 12:01 AM

Quote:

Originally Posted by DailyDriver86 (Post 2574112)
i absolutely love these fat/tall tires! what tires were they and what were you dropped on at this time? Thinking about using Tein S tech's with 225 50 17

They're 16x8+25 enkei compes. Tires are 225/50/16 Bridgestone RE-11A. Drop was on GodSpeed MonoMax RS coils.

You can get a similar fit on springs, but it won't be as low.

Cole 03-09-2016 12:01 AM

Quote:

Originally Posted by jawn (Post 2574114)
So the 720Forms fit!

That was the test fit. May or may not rub. Putting the wheels on at the end of the month, so we'll see how it fits then!

8R6 03-10-2016 04:26 PM

how do u like the kakimoto exhaust? i didnt even know there was one for our cars. looks good

Cole 03-10-2016 07:15 PM

Quote:

Originally Posted by 8R6 (Post 2576311)
how do u like the kakimoto exhaust? i didnt even know there was one for our cars. looks good

Love it, but I need to have the silencer in all the time. It's just way too boomy without it inside the cabin.

D_Thissen 03-10-2016 07:48 PM

I agree with @drewbot, those Enkei Compe's looked perfect on your car! Did you need to run a lot of negative camber to get them to fit?

rookie 03-10-2016 07:53 PM

Quote:

Originally Posted by D_Thissen (Post 2576658)
I agree with @drewbot, those Enkei Compe's looked perfect on your car! Did you need to run a lot of negative camber to get them to fit?

I actually have these on myself but I'm looking to also change wheels... still kinda torn if I should or not.

I'm still on stock ride height and they do poke (more so in the front) but I'm planning on at least -2 camber in front and I'll go from there.


All times are GMT -4. The time now is 03:14 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.