Fitment problems.. could use some help
 

What's up everybody, I'm Justin and I drive a 2014 BRZ limited.
I bought the BRZ used with about ~9,000 miles on it and maybe 2-3 months after i bought it i noticed the rear bumper was slightly out of place in the driver side. here's a picture:
http://imgur.com/j1Gx3Jl

I'm open for any ideas on how to fix this up. Thanks for your time and advice

Maybe I'm blind.. but I see no picture!

Yep link is no good. There are a few things that can be done depending on the issue but will need to see the pic to better make any recommendations.

http://postimg.org/image/vp9hu09ev/sorry about that, not sure what i did there lmao



(i'm a noob)

Upload your image here and paste the link: http://imgur.com/

still can't see it? :o

http://imgur.com/j1Gx3Jl

pictures should definitely be in here now. could really use some help

I was kind of hoping your problem was something like this:

http://www.freakingnews.com/pictures...ady--97088.jpg

definitely not that bad ;)