Horn Question
 

Hey Guys,

I just bought the Hella Horns for my BRZ. The only question I really have is the following - Does anyone know what kind of connector the male end of the horn is?

I'm sorry if I don't make sense, so I'm going to explain. Basically, I want to create a factory looking wire harness for the hella horns. I posted up on the forums because my car is in storage, and I've searched many places including ProDemand for connector info, but have not found anything. Once I find this, I'll post up what is needed to make the harness.

Thanks,
Soub

They're usually standard spade terminals. Probably the blue 12-10 gauge ones.

I didn't want to cut the harness, and I don't want to just crimp on spade connectors and plug them into the connector. Essentially my goal is to make a factory like connector because I live in a place with a lot of rain, and snow, and don't want to corrode wires :)

If I can't find a male end, I'll end up following the official write up for the horns. Thanks @murdoc


Sent from my Magic Unicorn using Tapatalk

Ahh my apologies I misread the original post.

Maybe buy a set of used horns from someone's part-out or from a junkyard, and cannibalize the connectors?