Remove roof molding for liquid wrap, how to?
 

Need to remove the pieces on the roof for autoflex. How to they pull out? Glued, clipped or what and where do I pull if clipped. Thanks
http://i66.tinypic.com/29g1qok.jpg

This is what an Internet dude had to say:

"I just did this today and thought I would post in case someone searches as I didn't find the answer here. Just gently pull up on the trim in the middle. Then work your way forward gently lifting the trim as you go. When you get to the front, there is a clip there. Just pull up and it pops out. Repeat towards the back of the trim."


humfrz

they pop out pretty easily. just be careful not to rip it out in a rush. i took mine off when i wrapped my roof and they went back in easy after i was done.

^ yup what he said. They really are just held in by pop-clips and can be removed easily.