|
Oil Pres. and Temp Gauge Install?
I'm looking to install an Oil Pressure and Oil Temperature gauge into a dual gauge A-Pillar set up. The gauges are the Prosport Evo brand so I believe I'll need an adapter for the galley plug(?).
Was wondering if anyone has a recommended shop that would be able to do the install or would even do a private job/install if paid haha. The A-pillar gauge is from Rexspeed and actually just adheres over the OEM one, no removal necessary. |
there are plenty of shops in the bay area able to do this. Mann Engineering and Speed Element would be closest. A little farther out would be Elite Performance and The Racer's Line
|
Post up some pics of your gauges!
Quote:
|
1 Attachment(s)
I just finished installing my oil pressure gauge last night. I tapped the galley above the crank case. Pretty straight forward if you go by a few DIYs on this forum.
Here's one to reference: http://theattack.rallysportdirect.co...r-ssubaru-brz/ You'll need to be comfortable tapping into wires. If not, I'd hit up Neal over at the racers line like Finch had mentioned. Good luck! Attachment 131749 Sent from my iPhone using Tapatalk |
Quote:
|
all the sweeps!
[ame="https://www.youtube.com/watch?v=TqAkkuXCFdw"]https://www.youtube.com/watch?v=TqAkkuXCFdw[/ame] |
Whatever all that is, I want it!!!
Quote:
|
| All times are GMT -4. The time now is 05:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.