How To Install Drift Armor BRZ FRS GT86
 

How to install Drift Armor for BRZ FRS GT86.

Just click the video.

[ame="https://www.youtube.com/watch?v=dDMQ4xWESGs"]Drift Armor BRZ FRS GT86 How To Install Front - YouTube[/ame]


First Step: Remove front bumper. Use this video as reference if you want: [ame="https://www.youtube.com/watch?v=YnzxbbFEtvQ"]How To Install: Mishimoto 2013+ Scion FR-S Subaru BRZ Direct Fit Oil Cooler - YouTube[/ame] ... Start @1.23

Remove.
https://scontent-iad3-1.xx.fbcdn.net...63&oe=576C9FF7

Remove.
https://scontent-iad3-1.xx.fbcdn.net...bc&oe=575D9549

Remove horn for the time being.
https://scontent-iad3-1.xx.fbcdn.net...4f&oe=576B79AF
It looks like something like this.
https://scontent-iad3-1.xx.fbcdn.net...50&oe=5770ED23

Remove.
https://scontent-iad3-1.xx.fbcdn.net...df&oe=5770E76A

Remove.
https://scontent-iad3-1.xx.fbcdn.net...3f&oe=576188CA

Remove.
https://scontent-iad3-1.xx.fbcdn.net...e3&oe=575B8F90



Comparison.
https://scontent-iad3-1.xx.fbcdn.net...16&oe=5769CB1B

https://scontent-iad3-1.xx.fbcdn.net...d0&oe=575F8AEC

https://scontent-iad3-1.xx.fbcdn.net...99&oe=5760F027




Reinstall everything backwards. You can relocated the horn below or on top. i

You can buy and more information here: www.driftarmor.com

PROS of drift Armor.
100% bolt on NO modification required for this front bar.
Increase engine air flow.
Lighter then OEM.
Provides more horizontal protection.
&
More room of more HP! (inner cooler)


Review:
I love it. The welds are good and gave me added protection. Install was a easy. Overall customer service was good. I like the fact that it was made in the USA because I like supporting my economy. & pricing! It's is the most affordable one in the market. Other competitors charge over 300 nearly 400 shipped for there bars. So, the valve is the here. I am very very interested on the rear set up. I will place my other for that one as well soon!

Image of the rear.
http://nebula.wsimg.com/42e74eb56d62...&alloworigin=1

@Mr. you were able to use the oem bolts to bolt the front bar back up to the chassis? I just tried to mount the bar up tonight for mock up and couldn't get the top threads to catch. I think the bar base is at least 1/4" thick, not sure if that has changed over time.