IkonMotorsports RB V3 Rep Wing
 

Hey guys! Just got my Rocket Bunny V3 Replica Spoiler from @Angela.IKON on here and am posting a small review on it for anyone else that is curious about it/wants to get it.

I placed the order late afternoon 8 days ago and just received my package today. Shipping itself only took 2-3 days as I ordered mine painted to match my 2013 Whiteout FRS. The paint process itself takes about 3 days.

Upon initial inspection, the spoiler looks great! I would say the only slight downside is no hardware, but that's because you have the freedom to use either 3M double-sided or Rivet it in like the actual RB spoiler. The paint is also good looking. I wouldn't say it's super Pearl-like, but placed on the car you can only tell the different in color in certain lights and angles. Fitment is good with no issues (sorry, not fitment pics, but I'll upload some later). The only small problem is that the paint was a bit distorted on the top. 3 very small dime-sized swirl things. Honestly, it's not even noticeable unless you're looking closely so I wouldn't even call this too much of a problem.

Here are some pictures and I'll probably install it later today so stay tuned for more! Thanks @Angela.IKON!

http://i.imgur.com/qcPAuUW.jpg

http://i.imgur.com/oRAwPGe.jpg

http://i.imgur.com/PFmgtNQ.jpg

http://i.imgur.com/jObBpeo.jpg

V3 wtf there are three versions to the rb kit? I thought there were only v1 and v2. Also there is Km4sh or what ever it is called but it is not a v3? Please post pics when installed.

V1, V2 and KM4SH are all widebody kits, with the appropriate wing.

V3 is just a wing.

Here you guys go!

So I did run into a small fitment issue with install. The sides need to be pushed down for them to touch the trunk so upon install using 3M it would pop up slightly. Held it down for a bit and now it seems to be holding. If it pops up again I'll probably resort to self-tapping screws or even rivets but only for the corner ends where the issue is happening. Don't wanna put too many holes in the trunk :/. Other than that it's great! Color looks a lot whiter cause my car is dirty/dusty as heck lol. I park right beneath the roof so all this dirt and crap drops onto my car.

Feel free to ask for any other angles.

http://i.imgur.com/xauGE6q.jpg

http://i.imgur.com/UuPJcys.jpg

http://i.imgur.com/ThOAcSf.jpg

Looks like 2015+ white lol, I don't think that's going to match even if you clean your car.

Yeah, a slight worry right now tbh lol

Hey Tony, thank you for the review! :)

If the color is actually off and not due to the dust, can you send me a tow hook cap or any paint sample of your vehicle?

I will have our company check it out and match it to that color.

Let me know!

I took these photos 2 days ago; here is the new one color matched to your tow hook cap:

http://i1382.photobucket.com/albums/...ps7i1vppvp.jpg

http://i1382.photobucket.com/albums/...pssyjnj3tj.jpg

http://i1382.photobucket.com/albums/...psnntvomcr.jpg

http://i1382.photobucket.com/albums/...ps1dizspg4.jpg

http://i1382.photobucket.com/albums/...psusvciqkl.jpg

http://i1382.photobucket.com/albums/...psh2c8c88d.jpg

Please let me know when you receive this one! Thanks :)

Angelas the man! I mean..... you know what I mean.

My v1 rb is turning out great btw. Good stuff from Ikon.

That's awesome, I'm so glad to hear! Thanks :D


Sent from my iPhone using Tapatalk

I want this wing :C