Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   TRD Japan seats for 86 (https://www.ft86club.com/forums/showthread.php?t=101335)

MisterSheep 02-10-2016 01:32 PM

TRD Japan seats for 86
 
Just wanted to open up a discussion about these seats.

https://www.japanparts.com/parts/detail/41905

http://s1.cdn.autoevolution.com/imag...-gallery_6.jpg


The most beautiful seats IMO for our cars. It's part of my build plan but being as I am in the united states, more specifically northern california, I haven't been unable to find anyone who has these seats. They look like a semi-bucket seat and curious as to what it might feel like for myself and other passengers.

go_a_way1 02-10-2016 01:32 PM

Quote:

Originally Posted by MisterSheep (Post 2542777)
Just wanted to open up a discussion about these seats.

https://www.japanparts.com/parts/detail/41905

http://s1.cdn.autoevolution.com/imag...-gallery_6.jpg


The most beautiful seats IMO for our cars. It's part of my build plan but being as I am in the united states, more specifically northern california, I haven't been unable to find anyone who has these seats. They look like a semi-bucket seat and curious as to what it might feel like for myself and other passengers.

I want these too but at like over 2 grand each no thanks

MisterSheep 02-10-2016 01:33 PM

Quote:

Originally Posted by go_a_way1 (Post 2542778)
I want these too but at like over 2 grand each no thanks

Japanparts.com is 2.5k for the pair. 3k after shipping.

go_a_way1 02-10-2016 01:45 PM

Quote:

Originally Posted by MisterSheep (Post 2542780)
Japanparts.com is 2.5k for the pair. 3k after shipping.

Oh okay I thought they were a lot more! Too bad they are 3700 CAD before shipping :( I must have been looking at other seats that cost me

MisterSheep 02-10-2016 01:47 PM

Quote:

Originally Posted by go_a_way1 (Post 2542804)
Oh okay I thought they were a lot more! Too bad they are 3700 CAD before shipping :( I must have been looking at other seats that cost me

Yeah I'm just curious if anyone has these or has sat in them. I'd like to put them into my car but idk what would happen if a larger than myself person were to get into them. I'm 6feet 185 pounds and 34 waist.

asdf 02-10-2016 01:53 PM

Paging @supra2nv

LOLS2K 02-10-2016 01:54 PM

Quote:

Originally Posted by MisterSheep (Post 2542806)
Yeah I'm just curious if anyone has these or has sat in them. I'd like to put them into my car but idk what would happen if a larger than myself person were to get into them. I'm 6feet 185 pounds and 34 waist.

Your measurements are pretty standard (I'm the same just 2" shorter:wub:) and I fit in most seats, even the tighter ones. I'd say things start to get uncomfortable passed 40 waist (I have some big friends).:cheers:

STV3 02-10-2016 02:03 PM

Believe he has them

http://www.ft86club.com/forums/showthread.php?t=40726

swarb 02-10-2016 02:21 PM

as mentioned on Japanparts.com
* One-touch reclining mechanism (40-stage adjustment) is equipped.
* Hip point locates almost same position as standard seat.
* Side airbag to be canceled when TRD seat is installed.

Not sure what they mean when they mention the hip point. I am not sure- They do look like they sit at a similar height to stock, and it uses bottom mounts. I myself would prefer a seat that sat lower for better ergonomics(for me) and helmet clearance. The leg bolsters on the seats do look longer with a raised angle and the end which I like. Unknown fitment is the worst part, Japanese seats are usually on the narrow side.

I would try to find out if there is a size chart and if the left and right side seats have the same features.
Also find out if the mounts/sliders are included.

MisterSheep 02-10-2016 02:58 PM

Quote:

Originally Posted by swarb (Post 2542859)
as mentioned on Japanparts.com
* One-touch reclining mechanism (40-stage adjustment) is equipped.
* Hip point locates almost same position as standard seat.
* Side airbag to be canceled when TRD seat is installed.

Not sure what they mean when they mention the hip point. I am not sure- They do look like they sit at a similar height to stock, and it uses bottom mounts. I myself would prefer a seat that sat lower for better ergonomics(for me) and helmet clearance. The leg bolsters on the seats do look longer with a raised angle and the end which I like. Unknown fitment is the worst part, Japanese seats are usually on the narrow side.

I would try to find out if there is a size chart and if the left and right side seats have the same features.
Also find out if the mounts/sliders are included.


I'll send an inquiry to japanparts asking about the product to ask your same questions.

go_a_way1 02-10-2016 03:01 PM

Quote:

Originally Posted by MisterSheep (Post 2542895)
I'll send an inquiry to japanparts asking about the product to ask your same questions.

I love ordering from japan parts. I have ordered a number of things from them and their grammar sucks so bad its funny!!

Kiske 02-10-2016 03:05 PM

If only we could get the Ts seats too!

MisterSheep 02-10-2016 03:10 PM

Quote:

Originally Posted by go_a_way1 (Post 2542901)
I love ordering from japan parts. I have ordered a number of things from them and their grammar sucks so bad its funny!!

I have yet to order everything but I am always on their site. They have 86 TRD parts for the 86 and I find it funny :lol: and honestly their grammar can't suck more than my co-worker's...

go_a_way1 02-10-2016 03:14 PM

Quote:

Originally Posted by MisterSheep (Post 2542919)
I have yet to order everything but I am always on their site. They have 86 TRD parts for the 86 and I find it funny :lol: and honestly their grammar can't suck more than my co-worker's...

Oh trust me man sometime I get replies like "me think part fit Japan not sure oversea" and I was all like "you think it fits a JDM car but your not sure, dont you sell these parts for JDM cars?" The response was something like "sorry we think it will fit USDM car but cant guarantee it. There is no returns for parts that dont fit" But the other half the time its not that bad.


All times are GMT -4. The time now is 03:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.