Euctek base map 7 psi(pump gas)
 

.

You wil need to talk to an ecutek tuner like @moto-mike or @Delicioustuning those guys will have some base tunes if its a known kit and sort you out with remote tuning.

Their are no opensource maps for turbo stuff
ecutek dont supply and base or NA maps with the ecutek system
some kit manufactures like avo will supply base maps specific to their kits but if you have put togeather your own kit then theirs no off the shelf stuff

What Steve said, you need to contact a tuner and have it remote tuned.

you got a couple of problems

1. ecutek tunes even base tunes from kit manufactures or tuners are locked to the dongle key in each individual ecutek kit ie you cannot share them.

2. unless an opensource tuner has developed a base tune for your specific kit, hightly unlikely, then your going to have to pay for the tune.

3. Naturally aspirated tunes theirs a fait bit of margin for error, boosted stuff this margin is much smaller

The ecutek guys base tunes are about 300, pretty good value rearly, since most will include racerom features needed for turbo tunes

Their are some opensource turbo kits around the SBD turbo kits use the Openflast Tablet OFT and they supply tunes to suit that kit, but that tunes is specifc to that kit. Like all turbo tunes they need to be secific to turbo\piping\intercooler\maf\map\wastegate ect their not interchangeable just cause your running say 7psi boost .s