Looking for TRD CAI part
 

Hey guys! I just recently bought a used TRD CAI from someone and while installing I noticed the kit had everything EXCEPT the grommet that holds the intake to the body frame itself. It's included in the hardware kit for the intake, but I don't want to spend $50 on a whole kit to only use the grommet piece. If anyone has the specific piece laying around please let me know. It's specifically item #7 on page 1 and 2, and a close image of the grommet on page 9, figure 3-7. Thank you!

I'll attach links to the images due to the fact it won't let me upload any images from my phone.
http://www.trdsparks.com/install/PTR03-18130inst.pdf

Good luck man, I lost mine at first; I looked for that thing forever and luckily found it. I couldn't find an equivalent online because of the weird measurements of it. You may get stuck buying the accessory kit to get it.

Thanks man! Hopefully someone pops up with an extra grommet. I've been told to go to Home Depot and AutoZone, but I know the grommets they have in stock aren't going to hold the intake properly due to the way the inside is cut to fit the extended piece on the intake.

I bought a grommet from advance and it worked fine. Still rolling it nearly 10K later. Think the package cost 5 bucks or so and had multiple grommets.

Yeah the grommet is nothing special, all you need is something to hold that little peg in place, the two bolts do most of the work. If you can find any grommet that will fit in that little hole and has an inner hole small enough to hold that little peg, you're good. There is nothing special about it other than its smaller on one side than the other.

Thanks guys!^^

So I found myself in the same situation doing mine tonight so I sailored it by using the left over rubber bushing from the third screw not utilized from the OEM airbox.
http://uploads.tapatalk-cdn.com/2016...c0d7320fea.jpghttp://uploads.tapatalk-cdn.com/2016...b78fe759ee.jpghttp://uploads.tapatalk-cdn.com/2016...e6f8a9b6f8.jpg

Sent from my SAMSUNG-SM-G891A using Tapatalk

Same here lol package of grommets from harbor freight had a size that worked for me 👍🏼


Sent from my iPhone using Tapatalk