Requesting help from UK mates!
 

Hello mates, I know my way around on US interweb but I am kind of lost in European websites. Google search doesn't seem to work well for what I am looking for. Is there an UK website where you guys look up and order Subaru parts via OEM catalog? For example in US, we have subaruparts.com and subarugenuineparts.com.

I need your kind help locating a couple euro specific OEM BRZ parts. I am looking for a front license plate bracket designed for European BRZ and push start trim for RHD specific. Please refer to the photos below. Part#, website or any help will be greatly appreciated. Thanks in advance!

http://www.telegraph.co.uk/content/d...nv9ax6_too.jpg


http://cdn.mkimg.carview.co.jp/minka...t=3dc311d5fddc

I did more research and found a part number for the push start switch trim:

92126CA020 for RHD
92126CA040 for LHD

I still need to find out where/who to contact for ordering in Europe. As for the front license plate bracket, I am starting to believe it is a molded part of the mustache trim. Could anyone confirm this?

http://image.superstreetonline.com/f...z%2Bgrille.jpg

You can try the following:

Www.subaru.co.uk/ accessories
Www.subaru4you.co.uk

I tend to go through dealers such as Bell & Colvill
www​.bellandcolvill.co.uk/subaru/

Thanks mate!:party0030: I will give them a try. If you own a BRZ in UK, could you please confirm that the front license bracket is molded on the mustache trim? or a separate piece that needs to be bolted on?

It is a separate piece. Part number of plate is: 57751CA040. Spring nut that mounts on bumper (used to fix the plate to bumper using 2 screws): 902510034. And lastly, screws (2X): M000314 . But you can simply use screws from hardware store (that's what I did).

There is no parts hyperstore in Europe that you can easily search parts for. But there are bunch of sites, where you can order parts via part number. For example: http://www.carparts-pros.com

Thank you sir very much!!! That was the exact information I was looking for. You are my hero!

No problems. Just forgot to mention - you need 2 spring nuts (not only one). :thumbsup: