OpenFlash Header + Procede for Phantom ESCs
 

Remaining items in excellent shape:

Procede Controller $400

*Original Post*

I have a complete Phantom ESC V1.5 along with a Procede Controller and OFT and OFH for a comprehensive setup.

It ran flawlessly for me in the few weeks I've owned and the power bug has taken hold of me, so the kit must go...

It's an earlier kit with the V1.5 dump pack upgrade. For those familiar with the kits, this originally didn't come with a relay that disabled the ESC when ignition power was terminated. The previous owner installed a relay to enable this feature, but because of the size of the relay, the wiring will no longer fit through the grommet hole and was cut by the original owner. I chose to use Posi-Lock connectors, which are re-usable wire connectors to reconnect the wires. If you've ever installed a car stereo or have basic wiring knowledge, it's a breeze.

There's a wealth of knowledge in the FI thread and plenty of install videos. I'll also label everything to make the install as painless as possible. I'm located in Southern California, so I can assist with the install as well.

Current wait time is ~1 year, so here's a chance to bypass the wait.

Prices OBO:

V1.5 ESC $Sold
Procede Controller $400
OFT $Sold
OFH $Sold

pm sent

@drewbot do it

You do realize you're selling the ESC for MORE than it is retail, right?

I believe he's including battery as well.

Nah

Because you can totally just buy one at this point without waiting at all right?


Supply and demand. Also, looks like he is including the battery.

PM sent.

yes. Sub'd to see fight to death over this

someone grab it. i waited mine for over 1 year.
no more downshifting to climbing to hill

sounds like a good deal to me. i picked mine up for the same price

Tempting...because I want to do a twin ESC setup....imagine that :O

Bump. Discount if everything or multiple items purchased.

PM'd.