![]() |
New Header
I am looking to put a header on my car. I recently bought new tires and rims, catback magnaflow exhaust, springs etc. I am not too familiar with headers so I need some help and have a couple questions. First is a header worth the price and the performance I will get from it? I am looking to buy some pretty decent but nothing too fancy. I am an everyday driver, do not take my car racing or anything. Just want to upgrade it a little bit. Suggestions and info about all this would be great.
Secondly I have also been looking into getting my car tuned, doing it myself. I have been looking at this self tuning kit in the link below. Input on that would be greatly appreciated, it seems to be the way to go as I dont have to take it to a dealer, but I want to know if there is any downsides like maybe not getting the most out of it by doing it myself, or maybe it is the same I dont know? http://www.modbargains.com/vishnu-op...subaru-brz.htm |
:search:
|
Quote:
Before you get jumped on ...... I suggest you review some of the 100s of threads about headers and a tune. It's my understanding that an aftermarket header and tune will allow the engine to make a bit more power and reduce the torque dip. However, if you're not going to autoX or track the car, and the torque dip doesn't bother you, I'd suggest you leave the exhaust and tune alone. humfrz - ain't no fun ...... :( PS - I see @swarb beat me to it......;) |
Get tomei like everyone else
|
Quote:
if all your doing is basic mods and you dont have a tuner nearby then its hard to beat the open flash header and oft tune combo for about $1000 decient header and decient tune that proven matched combo.assuming you like uel rumble sound. tomei are good well mde midpriced header. and if you have an ecutek tuner nearby that familar with brz\86 thats fine as well if you like uel sound and dont have a local tuner experienced on 86\brz then the oft and header combo for $1015 is probably worth a look you can buy it direct from openflash\vishnu performance http://openflashtablet.com/Automotiv...OFH/index.html |
Quote:
Also when considering headers I ahve searched so much, what is the difference in the UEL and EL & performnce difference in catless and catted header. I have a catback exhaust so could you sugggest a good quality header? I want to finish off doing my whole exhaust sytem and as far as I know since i have got a catback exhauast the last thing to do is get a header and the whole thing will be aftermarket. Thanks!!!! |
Quote:
second hand oft sell rearly well for little loss ecutek you need to buy licience350 plus tune about 250 if you get tuner to flash, if no ecutek tuner arround you need to buy cable to flash for anoyher 350 or so ecutek you can only sell the cable as ecuteck licience and tunes are locked to car tomei are probably better quality than openflash but will cost a bit more jdl are good but probably dearer again if you read the Basic Bolt on mods Giude below it will answer all your questions just be wary of cheap ebay headers the fitment is somtimes not good and they may have cracking or corrosin problems. http://openflashtablet.com/Automotiv...OFH/index.html may be a good option if no local tuner available tune flash device and header for about $1000 as ling as you like uel sound |
Quote:
Quote:
Sweet man thanks for the info. I think since you recommended I am going to go with that tuning device since everything comes with it & I really like the ft86 header which is about 1000 and its a uel |
Quote:
|
Quote:
|
Quote:
|
Quote:
in the midpriced header range https://www.google.com.au/search?q=o...w=1280&bih=619 |
:slap:
Quote:
|
I don't understand why this guy should get jumped on at all? Total crap that someone comes in with a solid question and gets SEARCH FOR IT NOOB, or some other crap like that. If you don't want to answer, spare yourself the time and don't answer it. I've never been to a more hostile auto forum in my life and i contribute this to the average age of the forum.
I'll say it again, little bulldogs that grab on and don't let go Its ridiculous that someone can't ask a question without being ousted and feeling like a moron. This isn't the way you pick up new members |
| All times are GMT -4. The time now is 12:33 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.